WERNER® D1508-1 D1500-1 Type IA Duty Single Section Straight Ladder, 8 ft H x 18-1/8 in W, 300 lb Load, 8 ft Top Step, Aluminum
The D1508-1 is an 8 ft one section aluminum straight ladder with a duty rating of 300 lb. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. The side rails are extra heavy duty I-Beam rails and the aluminum TRACTION-TRED® D-rungs are slip resistant. The rugged shoe rests flat or is held in spur position with the SHU-LOK® feature for use on hard or penetrable surfaces.
-
BrandWERNER®
-
UPC051751012231
-
Manufacturer Part NumberD1508-1
-
CountryUSA
-
Load Capacity300 lb
-
MaterialAluminum
-
Top Step Height8 ft
-
Top to Bottom Rung7 ft
-
TypeType IA Duty Single Section
-
Rung Diameter1-3/4 in
-
Rung Spacing12 in
-
Rung TypeD-Rung
-
Rung Width1-3/4 in
-
SeriesD1500-1
-
Number of Rungs8
-
Overall Height8 ft
-
Overall Width18-1/8 in
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- 1-3/4 in slip resistant TRACTION-TRED® D-rungs
- Extra heavy duty I-Beam rails
- Mar resistant molded end caps
- Rugged shoe rests flat or is held in spur position with SHU-LOK® feature
- 1 section
- 11 ft H reach
- 8 ft L open extended
- 8 ft L closed
- 3 in rails
- 1-1/8 in flange
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.2 (2007)|OSHA Compliant
Recently Viewed
WERNER® D1508-1 D1500-1 Type IA Duty Single Section Straight Ladder, 8 ft H x 18-1/8 in W, 300 lb Load, 8 ft Top Step, Aluminum
The D1508-1 is an 8 ft one section aluminum straight ladder with a duty rating of 300 lb. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. The side rails are extra heavy duty I-Beam rails and the aluminum TRACTION-TRED® D-rungs are slip resistant. The rugged shoe rests flat or is held in spur position with the SHU-LOK® feature for use on hard or penetrable surfaces.
HCI Preferred Supplier 46087 External Seat Radiator Drain Cock, 3/8 in Nominal, MIP End Style, Brass Body
HCI Preferred Supplier 46087 External Seat Radiator Drain Cock, 3/8 in Nominal, MIP End Style, Brass Body
2-GAL 85-W/140-W JT-7 GEAR OIL-CAT16182GAL >
2-GAL 80-W/90-W JT-7 GEAR OIL-CAT16172GAL >
Irwin® Quick-Grip® 58300 Spring Clamp, 3 in W Jaw, 3 in Clamping, 3 in Opening, 3 in D Throat, Resin
Irwin® Quick-Grip® 58300 Spring Clamp, 3 in W Jaw, 3 in Clamping, 3 in Opening, 3 in D Throat, Resin
Browning® 765309 VER 200 Standard-Duty Straight Bore Ball Bearing Insert With Seal Flinger and Snap Ring, 1.938 in Dia Bore, 3.781 in OD, 1 Rows, 2.031 in W, 7889 lb Dynamic/5216 lb Static Load
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
