WERNER® 7110-1 7100-1 Type IAA Duty Single Section Straight Ladder, 10 ft H x 18-1/16 in W, 375 lb Load, 10 ft Top Step, Fiberglass
The 7110-1 one section round rung 10 ft straight ladder is made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 375 lb making them durable and long lasting. The slip resistant, TRACTION-TRED® rungs are round, and the durable rail shields and shoe brackets help to protect the rails from damage. The plate and rung assemblies are riveted at four points to the side rails.
-
BrandWERNER®
-
UPC051751012613
-
Manufacturer Part Number7110-1
-
CountryUSA
-
Load Capacity375 lb
-
MaterialFiberglass
-
Top Step Height10 ft
-
Top to Bottom Rung9 ft
-
TreadSlip-Resistant
-
TypeType IAA Duty Single Section
-
Rung Diameter1-1/4 in
-
Rung Spacing12 in
-
Rung TypeRound
-
Rung Width1-1/4 in
-
Series7100-1
-
Number of Rungs10
-
Overall Height10 ft
-
Overall Width18-1/16 in
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- 1-1/4 in slip resistant TRACTION-TRED® round rungs
- Plate and rung assembly are riveted at four points to each side rail to allow for rung replacement
- Rugged, heavy duty extruded rung locks are spring loaded to operate smoothly
- Pre-pierced holes for easy field installation of accessories
- Durable rail shield and shoe bracket protects rail from damage
- Dual action feet with slip resistant pad and spur plate for use on hard or penetrable surfaces
- Mar resistant molded end caps
- Ideal for utility and telecommunication industries
- Shoe with slip resistant pad and spur plate
- 1 section
- 11 ft H reach
- 8 ft L open extended
- 8 ft L closed
- 3-5/16 in rails
- 1-3/16 in flange
- 16-13/16 in W fly
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Compliant
Recently Viewed
WERNER® 7110-1 7100-1 Type IAA Duty Single Section Straight Ladder, 10 ft H x 18-1/16 in W, 375 lb Load, 10 ft Top Step, Fiberglass
The 7110-1 one section round rung 10 ft straight ladder is made with non-conductive fiberglass rails. Easy to transport and maneuver, these ladders bear a duty rating of 375 lb making them durable and long lasting. The slip resistant, TRACTION-TRED® rungs are round, and the durable rail shields and shoe brackets help to protect the rails from damage. The plate and rung assemblies are riveted at four points to the side rails.
Starrett® 178MA Fillet/Radius Gage With Locking Device, 1 to 3 mm, 34 Leaves, Stainless Steel
The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 34 Leaves, 1-7mm Range, 0.25mm/0.5mm increments.
Gardner Bender HST-187 Heat Shrink Tubing, 3/16 in ID Expanded, 3/32 in ID Recovered, 4 in L, Polyolefin, Black
The Gardner Bender 3/16 in heat shrink tubing (8-Pack) provides abrasion and moisture protection for electrical wire and cable. This tubing is constructed of flame-retardant polyolefin.
14" 40# UV BLACK CABLE TIE--PACK OF 500-CTE1440UV500 >
Browning® 1045459 VP Series Type 2 Variable Pitch Sheave, 1-1/8 in Finished Bore, 4-3/4 in OD, 1 Groove, 3.3 to 4.1 in (3L)/3.6 to 4.6 in (A/4L)/3.8 to 4.8 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
BBI 221244 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/4 in Dia x 4 in L Shoulder, 3/4-5/8-11
BBI 221244 Shoulder Screw, Round Socket Head, ASTM A574 Alloy Steel, 3/4 in Dia x 4 in L Shoulder, 3/4-5/8-11
