WERNER 10' 375# 1-AA SINGLE ALUM/LADDERS WER 510-1
The 510-1 one section aluminum round rung 10 ft straight ladder has a duty rating of 375 lb. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. The side rails are extra heavy duty I-Beam rails and the aluminum round rungs are deeply serrated for slip resistance.
-
BrandWERNER®
-
UPC051751012408
-
Manufacturer Part Number510-1
-
CountryUSA
-
Load Capacity375 lb
-
MaterialAluminum
-
Top Step Height10 ft
-
Top to Bottom Rung9 ft
-
TreadSlip-Resistant
-
TypeType IAA Duty Single Section
-
Rung Diameter1-1/4 in
-
Rung Spacing12 in
-
Rung TypeRound
-
Rung Width1-1/4 in
-
Series500-1
-
Number of Rungs10
-
Overall Height10 ft
-
Overall Width16-7/8 in
- Exclusive ALFLO® rung joint means TWIST-PROOF® performance
- 1-1/4 in slip resistant TRACTION-TRED® round rungs
- Extra heavy duty I-Beam rails
- Heavy duty, self-aligning, free-swinging shoe with slip resistant tread and replaceable steel spur plate
- Hoop end caps
- Slip resistant pad foot
- 1 section
- 13 ft H reach
- 10 ft L open extended
- 10 ft L closed
- 3 in rails
- 1-3/16 in flange
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.2 (2007)|OSHA Compliant
Recently Viewed
The 510-1 one section aluminum round rung 10 ft straight ladder has a duty rating of 375 lb. The exclusive ALFLO® rung joint means TWIST-PROOF® performance every time. The side rails are extra heavy duty I-Beam rails and the aluminum round rungs are deeply serrated for slip resistance.
The AC10-20-03 three rung short body ladder jack is designed for quick field adjustments. The platform clamp system clamp secures the platform to the ladder jacks and ties supporting ladders together to help secure an entire ladder jack system. The light weight but sturdy jack mounts on either side of the extension ladder. It accepts stages up to 20in width. Recommended for use with 300 lbs type IA and 375 lbs type IAA extension ladders. (OSHA and ANSI allow use with 250 lbs type I extension ladders.).
Greenlee® 925-1-3/8 Ultra Hole Saw With Fixed Pockets, 1-3/8 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor
Greenlee® 925-1-3/8 Ultra Hole Saw With Fixed Pockets, 1-3/8 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor
REINFORCING CORD MADE OF POLYESTER, OIL RESISTANT, J BELT SERIES, 6 RIBS--HIGH CAPACITY PER RIB. J-TOOTH PROFILE
-PIX630J10>
MURRAY 6812051 Full size Gear Clamp, 1/2 to 1-1/4 in Clamp, #12 Trade, Stainless Steel Band, Stainless Steel Bolt, Domestic
Full size Gear Clamp, 1/2 to 1-1/4 in Clamp, #12 Trade, Stainless Steel Band, Stainless Steel Bolt, Domestic
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
