WERNER® 6206 6200 Type IA Step Ladder, 6 ft H Ladder, 300 lb Load, 5 Steps, Fiberglass, A14.5
The 6206 Fiberglass 6 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
-
BrandWERNER®
-
UPC051751014914
-
Manufacturer Part Number6206
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Tread3 in W
-
TypeType IA
-
ANSI CodeA14.5
-
Series6200
-
Base Spread41-1/4 in
-
Number of Steps5
-
Ladder Height6 ft
-
Bottom Width23-3/8 in
- Holster top is now ToolLasso ready
- Back-up plates reinforce all top connectors
- Shoulder bolt and nut on top hinge
- 4 rivets attach top to each front rail
- All steps and two rear horizontals are knee braced
- Double riveted, slip-resistant TRACTION-TRED® steps
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
- Shoe pads riveted to the edge - molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
- Every rivet backed up by metal plate or washer to protect rails
- Optional yellow molded pail shelf kit, model no, 76-2
- Energy diffusing geometry
- 3-1/8 in front wide x 1-7/8 in rear wide rail
- 1-3/16 in front wide x 1-3/16 in rear back wide flange
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 89408348 |
| MSC | 89408348 |
| MSC | 89408348 |
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Standard
Recently Viewed
WERNER® 6206 6200 Type IA Step Ladder, 6 ft H Ladder, 300 lb Load, 5 Steps, Fiberglass, A14.5
The 6206 Fiberglass 6 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
The RIDGID® 206 and 246 Soil Pipe Cutters utilize an integral ratchet handle centered on the pipe. This is especially useful when cutting pipe in trenches, and helps keep the width of the trench to a minimum. Both use a unique hooking mechanism to make hooking the chain easier. The 206 uses the same chain as the 226 and 276, while the chain on the 246 is larger and allows it to cut 4 in class 22 water main and 2 to 5 in extra heavy duty soil pipe.
48" IMPORT ALUMINUM PIPE WRENCH - TABPW48ALUM>
Coilhose® 1502 Coilflow Manual Industrial Type 15 Manual Industrial Hose Connector, 1/4 in Nominal, Quick Connect Coupler x FNPT, 300 psi Pressure, Brass, Domestic
Coilhose® 1502 Coilflow Manual Industrial Type 15 Manual Industrial Hose Connector, 1/4 in Nominal, Quick Connect Coupler x FNPT, 300 psi Pressure, Brass, Domestic
Wilton® Tradesman's 63199 Tradesman Round Channel Bench Vise With Swivel Base, Standard Serrated Jaw, 4 in Jaw Opening, 4-1/2 in W Ductile Iron Jaw, 3-1/4 in D Throat
Proudly made in the USA, the Tradesman round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Tradesman round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the Tradesman vise is equipped with main jaws, pipe jaws and a machined anvil work surface.
MORSE® 44469 4593 Center Cutting Regular Length Single End Roughing End Mill, 1-1/4 in Dia Cutter, 2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 4-1/2 in OAL, Bright
MORSE® 44469 4593 Center Cutting Regular Length Single End Roughing End Mill, 1-1/4 in Dia Cutter, 2 in Length of Cut, 6 Flutes, 3/4 in Dia Shank, 4-1/2 in OAL, Bright
