WERNER 8' 375# 1-AA P/FORM F/G STEPLADDER WER P-7408
The P7408 Fiberglass 8 ft Platform Ladder has a rating of 375 pounds and maintains a full set of horizontals on the rear sections. The large work platform provides a secure and comfortable work area while the Edge® bracing system and external rails shields add to the durability of the product. The safety guard rail at the top of the ladder encourages proper ladder use. Fiberglass rails are non-conductive for working near electricity.
-
BrandWERNER®
-
UPC051751011432
-
Manufacturer Part NumberP7408
-
CountryUSA
-
Load Capacity375 lb
-
MaterialFiberglass
-
Tread3 in W
-
TypeType IAA
-
ANSI CodeA14.5
-
SeriesP7400
-
Base Spread66-5/8 in
-
Number of Steps8
-
Ladder Height8 ft
-
Bottom Width34 in
- Safety guard rail encourages proper ladder use
- Thick side plates
- Shoulder bolt and lock nut on top hinge
- 4 solid aluminum rivets attach top to each front rail
- Back-up plates reinforce all top connectors
- Large platform provides secure and comfortable work area
- Full set of rear horizontals spaced one per foot
- Slip-resistant TRACTION-TRED® extra wide steps are knee braced and double riveted
- Glas mark violator stripes on rails allow ladder to be more visible
- The edge bracing system helps to decrease damage to rail
- Aluminum external rail shield helps protect against abrasion damage
- Shoe pads riveted to the edge structure
- Every rivet backed up by metal part or washer to protect rails
- Internal aluminum spreaders on 8 ft and 10 ft models
- Energy diffusing geometry
- 10 ft rail length
- 3-1/8 in front wide x 1-7/8 in rear wide rail
- 1-3/16 in front wide x 1-3/16 in rear back wide flange
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 2113510 |
-
UNSPSC30191506
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Standard
-
Owners/User Manual
Recently Viewed
The P7408 Fiberglass 8 ft Platform Ladder has a rating of 375 pounds and maintains a full set of horizontals on the rear sections. The large work platform provides a secure and comfortable work area while the Edge® bracing system and external rails shields add to the durability of the product. The safety guard rail at the top of the ladder encourages proper ladder use. Fiberglass rails are non-conductive for working near electricity.
NGK BPR-6-ES SPARK PLUG-NGK7131 >
Gates® Power Transmission 2926V646 Banded Multi-Speed V-Belt, 1-13/16 in W Top, 26 deg Groove, 65-1/2 in L Outside, Rubber
Power transmission systems do more than operate at constant speeds with constant outputs. Customers increasingly need variable speed systems to regulate the speed and rotational force, or output torque, of critical mechanical equipment. Our Multi-Speed belts are engineered for efficiency, energy savings and increased productivity at a wide range of speeds and speed ratios.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
