Intertape® 99486 PT14 Specialty UV-Resistant Masking Tape, 54.8 m L x 18 mm W, 5.5 mil THK, Synthetic Rubber Adhesive, Fine Crepe Paper Backing
Intertape® 99486 PT14 Specialty UV-Resistant Masking Tape, 54.8 m L x 18 mm W, 5.5 mil THK, Synthetic Rubber Adhesive, Fine Crepe Paper Backing
-
BrandIntertape®
-
UPC077922808366
-
Manufacturer Part Number99486
-
CountryUSA
-
Tensile Strength23 in-lb
-
Thickness5.5 mil
-
ColorBlue
-
TypeSpecialty UV-Resistant
-
Adhesion Strength26 in-oz Steel
-
Adhesive MaterialSynthetic Rubber
-
Width18 mm
-
SeriesPT14
-
Backing MaterialFine Crepe Paper
-
Specifications MetASTM Specified
-
Length54.8 m
- Blue Masking Tape featuring IPGs patented Bloc-it Clean Line Technology
- Edge treated for clean, crisp paint lines
- Smooth backing for superior paint lines and reduced fingertip abrasion
- Packaging may vary
-
UNSPSC31201503
-
Package Description32/PK
-
Standards/ApprovalsPSTC Approved
-
SDS
-
Catalog
-
Specification Sheet
-
Owners/User Manual
Recently Viewed
Intertape® 99486 PT14 Specialty UV-Resistant Masking Tape, 54.8 m L x 18 mm W, 5.5 mil THK, Synthetic Rubber Adhesive, Fine Crepe Paper Backing
Intertape® 99486 PT14 Specialty UV-Resistant Masking Tape, 54.8 m L x 18 mm W, 5.5 mil THK, Synthetic Rubber Adhesive, Fine Crepe Paper Backing
SmartlockPro® N7899-HGR 1-Phase Duplex GFCI Receptacle, 125 VAC, 20 A, 2 Poles, 3 Wires, Red
SmartlockPro® N7899-HGR 1-Phase Duplex GFCI Receptacle, 125 VAC, 20 A, 2 Poles, 3 Wires, Red
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
Reelcraft® 1-HR1004-A Adjustable Hose/Cord Bumper Stop, For Use With L4000, L4500, L5000 and DP Series Hose Reels, 1/4 in ID Hose, 12 AWG, 3 Conductors, Rubber, Black, Import
Proto® J5854 Socket Adapter, Full Polished, Square Drive, 3/4 in Male Drive, 1 in Female Drive, Female x Male Adapter, ASME B107.500/B107.10M, ANSI B107.10M, Federal GGG-W-641E, Alloy Steel
Proto® J5853 Socket Adapter, Full Polished, Square Drive, 1 in Male Drive, 3/4 in Female Drive, Female x Male Adapter, ASME B107.500/B107.10M, ANSI B107.10M, Federal GGG-W-641E, Alloy Steel

