WERNER 12' 300# 1-A F/GLS STEPLADDERS WER 6212
The 6212 Fiberglass 12 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
-
BrandWERNER®
-
UPC051751031959
-
Manufacturer Part Number6212
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Tread3 in W
-
TypeType IA
-
ANSI CodeA14.5
-
Series6200
-
Base Spread78-1/4 in
-
Number of Steps11
-
Ladder Height12 ft
-
Bottom Width33-7/8 in
- Holster top is now ToolLasso ready
- Back-up plates reinforce all top connectors
- Shoulder bolt and nut on top hinge
- 4 rivets attach top to each front rail
- All steps and two rear horizontals are knee braced
- Double riveted, slip-resistant TRACTION-TRED® steps
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
- Shoe pads riveted to the edge - molded brace and foot pad combination provides enhanced bracing strength and increased protection against damage
- Every rivet backed up by metal plate or washer to protect rails
- Optional yellow molded pail shelf kit, model no, 76-2
- Energy diffusing geometry
- 3-1/8 in front wide x 1-7/8 in rear wide rail
- 1-3/16 in front wide x 1-3/16 in rear back wide flange
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 3W422 |
-
UNSPSC30191501
-
Standards/ApprovalsANSI A14.5 (2007)|OSHA Standard
Recently Viewed
The 6212 Fiberglass 12 ft Step Ladder is Ideal for the homeowner or the professional. With a duty rating of 300 pounds, it features a HolsterTop with the lock-in System to secure tools from falling while keeping them right at hand. The ladder offers a full set of rear horizontals and heavy duty internal spreaders. All steps are knee braced and the foot pads are riveted to the Edge® structure. The EDGE bracing system helps protect the rail from damage. Each TRACTION-TRED® step is slip resistant and double riveted. Fiberglass rails are non-conductive for working near electricity.
Gardner Bender GSW-121 Toggle Switch, 125/277 V AC, 20/10 A, 3/4 hp Power Rating, SPST Contact
The Gardner Bender 20/10 Amp Toggle Switch features an O ring and has screw terminals for quick-and-easy connections. The switch offers single-pole, single-throw (SPST) ON-OFF circuitry in a classic bat-handle design for easy usage.
WEEKENDER ANGULAR LADDER RACK - WTG1475 >
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
JASON 5VX1030 5/8" X 103" LENGTH, RUBBER V-BELT, RAW EDGE, BLACK 0.62" WIDTH.
SPECIALLY DESIGNED FOR USE ONLY 40% AS MUCH ENERGY TO BEND AROUND YOUR MACHINE'S PULLEYS AND ARE PROVEN TO OUTLAST THE COMPETITION. BELT ANGLE IS APPROXIMATELY 40 DEGREES. THE BELTS ARE CONSTRUCTED OF HIGHLY ENGINEERED AND HIGH-PERFORMANCE COMPONENTS.
-JAS5VX1030 >
1/2-HP, ODP, 1-PH, 115/230 & 110/220-V, 3600-RPM, 48 MOTOR -USM6341 >
