MCR Safety 181640 Faceshield Visor, Clear, PETG, 8 in H x 16 in W x 3/64 in THK Visor, For Use With MCR Safety Headgears, ANSI Z87+
Safety Face Shield - Universal Clear Impact Resistant PETG Material 8 Inches x 16 Inches .040 Inches Thickness Excellent for splash protection and impact resistance MCR Safety's headgear and face shields offer superior protection from liquid splashes and flying debris that would otherwise be damaging to the face. An assortment of brackets, face shield sizes, and materials make it a good bet that you can find an option suitable for you. The 181640 is a clear PETG visor that measures 8 inches x 16 inches and is .040 inches thick. Find the best face shields at MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
-
BrandMCR Safety
-
UPC766868181649
-
Manufacturer Part Number181640
-
CountryUSA
-
MaterialPETG
-
ColorClear
-
Visor Height8 in
-
Visor Thickness3/64 in
-
Visor Width16 in
-
Specifications MetANSI Z87+
-
Suitable For Use WithCrews Headgears
- Face shield - clear PETG material
- Face shield - clear PETG material
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KB85181640 |
| Fastenal | 1002065 |
| Grainger | 2ELR2 |
| MSC | 89374383 |
-
UNSPSC46181707
-
Package DescriptionEACH
-
Standards/ApprovalsANSI Z87+
-
Specification Sheet
Recently Viewed
MCR Safety 181640 Faceshield Visor, Clear, PETG, 8 in H x 16 in W x 3/64 in THK Visor, For Use With MCR Safety Headgears, ANSI Z87+
Safety Face Shield - Universal Clear Impact Resistant PETG Material 8 Inches x 16 Inches .040 Inches Thickness Excellent for splash protection and impact resistance MCR Safety's headgear and face shields offer superior protection from liquid splashes and flying debris that would otherwise be damaging to the face. An assortment of brackets, face shield sizes, and materials make it a good bet that you can find an option suitable for you. The 181640 is a clear PETG visor that measures 8 inches x 16 inches and is .040 inches thick. Find the best face shields at MCR Safety! This product meets the ANSI/ISEA Z87.1-2025 standard.
Apex® M-497 Magnetic Bit Holder With 3/8 in Turned Shank, 1/4 in Drive, Tool Steel, 1/4 in Hex
Apex® M-497 Magnetic Bit Holder With 3/8 in Turned Shank, 1/4 in Drive, Tool Steel, 1/4 in Hex
Browning 27-TOOTH R-BUS #100 CHAIN SPROCKET BRW H-100-R-27
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
Koyo NA4905 Metric Series Caged Round Bore Needle Roller Bearing With Inner Ring, 25 mm Dia Bore, 42 mm OD, 1 Row, 17 mm W, 24.3 kN Dynamic/31.7 kN Static Load
Heavy duty Needle Roller Bearings consists of a machined and ground channel-shaped outer ring with a complement of needle rollers and a cage. The high-strength cage retains and guides the rollers. An optional lubrication groove and hole in the outer ring facilitates re-lubrication. These bearings can be used with or without machined and ground inner ring, depending on the suitability of the shaft as a raceway surface.
3/8" X 5" CENTER PUNCH-ARS70235 >
Ingersoll-Rand 7807R General Duty Right Angle Air Drill, 3/8 in Keyed Chuck, 0.33 hp, 4 cfm Air Flow, 90 psi, 8.11 in OAL
Ingersoll-Rand 7807R General Duty Right Angle Air Drill, 3/8 in Keyed Chuck, 0.33 hp, 4 cfm Air Flow, 90 psi, 8.11 in OAL
