WERNER 5' 200# TY-3 PLAT ALUM LADDER WER 265
The 265 3 step type III aluminum platform ladder has a duty rating of 200 pounds and comfortable, tubular rails. The SPILL-PROOF® pail holder with rag rail is ideal for painting projects. The pail shelf also has convenient tool holders and folds automatically with the platform. Folds to 3-1/2 in for compact, convenient storage. The large, slip resistant platform provides a comfortable work area.
-
BrandWERNER®
-
UPC051751010077
-
Manufacturer Part Number265
-
CountryUSA
-
Load Capacity200 lb
-
Platform Depth14-1/2 in
-
Platform Height33-1/2 in W
-
Platform Width14-1/2 in
-
MaterialAluminum
-
TypeType III
-
Series260
-
Base Spread33-1/4 in
-
Number of Steps3
-
Ladder Height9 ft
-
Step Depth3 in
-
Bottom Width21-1/2 in
- Comfortable tubular rails
- SPILL-PROOF® pail holder with rag rail and convenient tool holders
- Folds automatically with platform
- Large comfortable slip resistant platform
- Mar resistant feet
- Folds to 3-1/2 in for compact, convenient storage
- Silver color
- 33-1/2 in H to platform
- Features tray and pail shelf
- 9 ft H reach
-
UNSPSC30191506
-
Standards/ApprovalsANSI A14.2 (2007)
Recently Viewed
The 265 3 step type III aluminum platform ladder has a duty rating of 200 pounds and comfortable, tubular rails. The SPILL-PROOF® pail holder with rag rail is ideal for painting projects. The pail shelf also has convenient tool holders and folds automatically with the platform. Folds to 3-1/2 in for compact, convenient storage. The large, slip resistant platform provides a comfortable work area.
Apex® 320-2X Power Drive Bit, 5F-6R Slotted Point, 1-15/16 in OAL, Steel
Browning® Classical Gripbelt® 1026913 AK Series Type 3 Single Groove Sheave, Finished Bore, 5/8 in Dia Bore, 5.95 in OD, 5.9 in (A)/5.36 in (3L) Dia Pitch, 3/4 in W Face
Sealmaster® gold mounted ball bearings feature wide outer race insert bearing with a land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system. This provides a direct path for lubrication into the bearing. It also helps prevent outer ring rotation. Available with either setscrew or Skwezloc®concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex®HP grease loss and friction.
1/2" -FEMALE PIPE THREAD STAINLESS STEEL CROSSES-FIT1/2SSCRO >
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
