Dremel® 290-01 Corded Engraver Kit, Keyed Chuck, 115 V
Dremel® 290-01 Corded Engraver Kit, Keyed Chuck, 115 V
-
BrandDremel®
-
UPC080596002909
-
Manufacturer Part Number290-01
-
CountryUSA
-
Tool/KitKit
-
Chuck TypeKeyed
-
Frequency Rating60 Hz
-
TypeCorded
-
Voltage Rating115 V
-
Cord Type6 ft
-
Amperage Rating0.02 A
-
Series290
-
Dimensions6-1/2 in L x 8-1/2 in W x 8-1/2 in H
-
Strokes per Minute7200 spm
- Stroke adjustment dial regulates engraving depth from fine lines to deep grooves
- Replaceable carbide point lets you engrave on most surfaces
- Optional 9929 diamond point for heavy duty use on hard surfaces
- Letter/number template helps etch words and numbers
- Soft grip adds extra comfort and control
- Light and compact design provides comfortable use for precision engraving performance
- Decorate metal, glass and stone for an individual touch
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 09029208 |
| MSC | 09029208 |
-
UNSPSC27112718
-
Standards/ApprovalsUL Listed
-
Warranty2 Years Limited
-
Catalog
Recently Viewed
Dremel® 290-01 Corded Engraver Kit, Keyed Chuck, 115 V
Oatey® 34061 Water Heater Pan With 1 to 1-1/2 in PVC Adapter, 20 in, Plastic
Oatey® Plastic Water Heater Pans with 1 in. - 1-½ in. PVC adapter (1-½ in. over) can be installed under electric water heaters to protect from water damage. Available with 1-½ in. PVC drain fittings to allow for connection to indirect drain.
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Southwire® SIMpull THHN® 11596457 Type THHN/THWN/AWM Building Wire, Spool Packaging, 600 V, (1) 10 AWG Solid Copper Conductor, 500 ft L, White
THHN copper conductors are primarily used in conduit and cable trays for services, feeders and branch circuits in commercial or industrial applications as specified in the National Electrical Code. Voltage for all applications is 600 volts.
