Louisville® FH1006 FH1000 1-Stage Heavy Duty Single Extension Ladder, 6 ft OAL, 300 lb Load, Fiberglass, Type IA
This Louisville 6 foot non-conductive fiberglass shelf ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder is designed so that steps are at level when the ladder is set at 18 degrees. This shelf ladder is equipped with a rubber bumper that extends 6-inches down the side rails to protect the landing surface and to provide stability, heavy-duty gusset bracing, angled aluminum slip-resistant rubber feet, double-rivet step construction, and angled serrated aluminum steps. This ladder is ideal for getting to shelves with narrow aisles where standard ladders will not fit. The Louisville FH1006 shelf ladder meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
-
BrandLouisville®
-
UPC728865024510
-
Manufacturer Part NumberFH1006
-
CountryUSA
-
Load Capacity300 lb
-
MaterialFiberglass
-
Rail TypeNon-Conductive
-
Maximum Working Length3 ft 10 in
-
Type1-Stage Heavy Duty Single
-
ANSI CodeType IA
-
Section Length6 ft
-
SeriesFH1000
-
Shoe TypeRubber Bumper
-
Outside Shoe Base Width15-1/8 in
-
Overall Length6 ft
- Angled Aluminum Slip-Resistant Rubber Feet
- Double-Rivet Step Construction
- Serrated Aluminum Steps
- Heavy-Duty Gusset Bracing
- Steps are level when the ladder is set at 18 deg
- Rubber bumper - ladder has parallel sides with thick rubber bumpers extending 6-inch down the side rails for protection of landing surface and stability
- Double rivet step construction - each step secured with six, large headed, semi-tubular steel rivets for maximum strength
- Ideal for getting to shelves with narrow aisles when standard ladders will not fit
- Standard step rung
- 3 in step depth
- 3-1/8 in rail depth
- 3-1/4 in closed cubic feet
- 10 ft 4 in maximum reach
- 71-7/8 in H x 15-1/5 in W x 3-1/4 in D closed
- 15-1/5 in bottom width
- 3-1/4 in base spread
- 6 steps
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 0532963 |
-
UNSPSC26120000
-
Package DescriptionEACH
-
Standards/ApprovalsOSHA Compliant
-
Specification Sheet
Recently Viewed
Louisville® FH1006 FH1000 1-Stage Heavy Duty Single Extension Ladder, 6 ft OAL, 300 lb Load, Fiberglass, Type IA
This Louisville 6 foot non-conductive fiberglass shelf ladder has a load capacity of 300 lb, rated ANSI Type IA. This ladder is designed so that steps are at level when the ladder is set at 18 degrees. This shelf ladder is equipped with a rubber bumper that extends 6-inches down the side rails to protect the landing surface and to provide stability, heavy-duty gusset bracing, angled aluminum slip-resistant rubber feet, double-rivet step construction, and angled serrated aluminum steps. This ladder is ideal for getting to shelves with narrow aisles where standard ladders will not fit. The Louisville FH1006 shelf ladder meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
Milwaukee® 44-20-0235 Spindle Lock Assembly, For Use With 6065/6065-6 Serial 752C 7 or 9 in 5000 rpm Sander
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
Browning 27-TOOTH P-BUSH #50 CHAIN SPROCKET BRW H-50-P-27
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
Milwaukee® M18™ 2664-22 High Torque Cordless Impact Wrench Kit With Friction Ring, 3/4 in Square Drive, 0 to 2200 bpm, 525 ft-lb Torque, 18 VDC, 9 in OAL
Engineered for heavy use, the M18™ 3/4 in in high torque impact wrench delivers maximum cordless power on the jobsite. With a Milwaukee® 4-pole motor and powerful impact mechanism, this cordless impact wrench delivers a reliable 525 ft-lb of torque with maximum runtime. The REDLITHIUM™ extended capacity battery pack delivers more work per charge and more work over pack life than the competitors, as well as best-in-class performance in extreme jobsite conditions. You'll get consistent speed control between 0 to 1900 rpm and 0 to 2200 IPM with the variable-speed trigger. A 3/4 in anvil with friction ring allows quick and easy one-handed socket changes. The M18™ impact wrench's onboard, real-time battery fuel gauge helps you monitor the charge precisely, so there's less downtime on the job. Lightweight and portable, with superior ergonomics, this 18 V cordless power tool offers ultimate comfort during prolonged use. The kit includes two M18™ XC batteries an M18™ and M12™ multi Vage Lithium-Ion battery charger and a carrying case.
Full spectrum daylight color temperature
Long-lasting lifespan of 9,000
Comes in a case of 30
Delivering 2500 Lumens, these high output T12 linear tubes are a great choice for use in commercial or industrial applications.
