Southwire Company

Topaz's EMT 90° elbow is precision manufactured to deliver optimum safety and performance. Fabricated from galvanized steel for low conductivity and high corrosion resistance, all surfaces, both interior and exterior are free from defect to ensure a secure connection to EMT conduit and to preserve integrity and longevity. Available in sizes from 1/2” to 4”; cULus approved, meets Federal specification WW-C-563.

Southwire - Topaz 4 in octagon blank flat covers are used to cover 4 in octagon box wiring and provide a means for access when future conduit runs are required. cULus listed and RoHS compliant.

REDUCING BUSHINGSTopaz's line of Reducing Bushings reduce the size conduit hubs; smooth and rounded integral bushing offers conductor protection. Fabricated from strong and long lasting steel or high grade malleable iron. Steel sizes from 1/2” by 3/8” to 2” by 1 1/2”; malleable iron available in sizes from 2 1/2” by 1” to 4” by 3 1/2”.

Topaz carries a complete line of Weatherproof Covers in a variety of designs to suit multiple applications. All models install cleanly and feature large cord openings for ease of use. Our Single Gang Duplex Horizontal Cover is fabricated from strong, durable and lightweight copper free aluminum and features an aluminum cast cover with spring loaded lid for easy accessibility.All models include gasket, mounting hardware and instructions; available in gray, white and bronze. UL listed, 2011 NEC and NEMA 3R compliant. Point of purchase packaging promotes self merchandising and easy display.

Southwire® 094138901 Cube Tap Extension Cord, 13 A at 125 VAC, 1625 W, 12 ft L Cord, 2 Conductors

Enable fast, easy and secure 45°directional changes in conduit runs and allow for design configuration changes with Topaz's Schedule 40 PVC 90° Plain End Elbows. Manufactured from rugged, nonconductive PVC, the elbow is finished with two plain, spigot ends. Suitable for above or below ground use and in concrete casement; cULus approved in sizes from 1/2” to 6.”

Southwire's Bare Copper is used for residential electrical systems before entering the home, usually at the meter base. It is also used as a residential grounding wire. Solid and stranded bare copper (Classes AA and A) are used for overhead transmission and distribution applications. Solid bare copper (Classes B and C) are used for non-insulated hook-ups, jumpers and electrical construction.

Southwire's Bare Copper is used for residential electrical systems before entering the home, usually at the meter base. It is also used as a residential grounding wire. Solid and stranded bare copper (Classes AA and A) are used for overhead transmission and distribution applications. Solid bare copper (Classes B and C) are used for non-insulated hook-ups, jumpers and electrical construction.

Available in 1/2” to 4” sizes,Topaz's Schedule 40 PVC T Type Conduit Bodies allow 3-way inline access in conduit systems, enable easy splicing and can correct and change direction of conduit runs. Lightweight, noncorrosive and nonconductive PVC construction enables easy installation in small areas. Removable cover with zinc plated screws; UL approved and always ready for fast delivery.

Topaz's 6" x 6" x 4" PVC products are strong and long lasting; precisely fabricated for optimal safety during installations. Our Schedule 40 PVC Junction Box is a surface mounted enclosure, designed without entrance hubs, to allow multiple conduit connections and wire splices made within. See product spec sheet for more details.

Topaz's 12" x 12" x 4" PVC products are strong and long lasting; precisely fabricated for optimal safety during installations. Our Schedule 40 PVC Junction Box is a surface mounted enclosure, designed without entrance hubs, to allow multiple conduit connections and wire splices made within. See product spec sheet for more details.

Southwire® copper UF-B cable is generally used as feeder to outside post lamps, pumps, and other loads or apparatus fed from a distribution point in an existing building as specified in the 2011 National Electrical Code. UF-B cable may be used underground, including direct burial. Multiple conductor UF-B cable may be used for interior branch circuit wiring in residential or agricultural buildings at conductor temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified by the National Electrical Code. UF-B can be used in applications permitted for NMC in Section 334.10(B) of the National Electrical Code. Voltage rating for UF-B cable is 600 volts.

Southwire® copper UF-B cable is generally used as feeder to outside post lamps, pumps, and other loads or apparatus fed from a distribution point in an existing building as specified in the 2011 National Electrical Code. UF-B cable may be used underground, including direct burial. Multiple conductor UF-B cable may be used for interior branch circuit wiring in residential or agricultural buildings at conductor temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified by the National Electrical Code. UF-B can be used in applications permitted for NMC in Section 334.10(B) of the National Electrical Code. Voltage rating for UF-B cable is 600 volts.

Southwire® copper UF-B cable is generally used as feeder to outside post lamps, pumps, and other loads or apparatus fed from a distribution point in an existing building as specified in the 2011 National Electrical Code. UF-B cable may be used underground, including direct burial. Multiple conductor UF-B cable may be used for interior branch circuit wiring in residential or agricultural buildings at conductor temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified by the National Electrical Code. UF-B can be used in applications permitted for NMC in Section 334.10(B) of the National Electrical Code. Voltage rating for UF-B cable is 600 volts.

Southwire® copper UF-B cable is generally used as feeder to outside post lamps, pumps, and other loads or apparatus fed from a distribution point in an existing building as specified in the 2011 National Electrical Code. UF-B cable may be used underground, including direct burial. Multiple conductor UF-B cable may be used for interior branch circuit wiring in residential or agricultural buildings at conductor temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified by the National Electrical Code. UF-B can be used in applications permitted for NMC in Section 334.10(B) of the National Electrical Code. Voltage rating for UF-B cable is 600 volts.

Southwire® Type SEU, service entrance cable is primarily used to convey power from the service drop to the meter base and from the meter base to the distribution panelboard; however, the cable may be used in all applications where Type SE cable is permitted. SEU may be used in wet or dry locations at temperatures not to exceed 90C. Voltage rating is 600 volts.

72" 12/3 SJTW QUAD GFCI INTERRUTOR

Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.

This 14/3 Replacement Cord is designed for heavy-duty use. It features a right-angled, grounded plug that provides extra protection for your appliances. This sturdy plug has a capacity of 125 volts, 15 amps, and 1875 watts. Additionally, its light tan color blends into almost any space.

Southwire 48006 14/3 ga 30 ft cord reel power Station offers 30 ft of portable power and keeps your workstation organized. This product is made of heavy-duty steel and comes with mounting hardware and a (3) outlet power block. The black extension cord is 30 ft long and grounded for your safety. The hub is red and black for improved visibility and is made of steel. This product is UL listed for your safety. Coleman Cable, Inc. Is a leading manufacturer and innovator of electrical and electronic wire and cable products for the security, sound, telecommunications, electrical construction, retail, commercial, industrial, irrigation, HVAC and automotive markets. Coleman Cable, Inc. Offers a family of leading brands such as Moon rays, Fire Shield and Woods®. Woods® has been a leading developer of electrical products for consumers and professional contractors. With years of experience, Woods® Industries collaborates with their customers to deliver quality products to retail.

Woods® Yellow 14/3-Gauge 6-Outlet Surge Strip features 1440-Joules of surge protection and protects household electronics from sudden changes in electrical Voltage, including when heavy-duty home appliances are turned on and off. The product safely converts a standard outlet into 6 surge protected grounded outlets. Use with household electronics such as digital radios, cordless phones, portable stereos plus much more. The extra-long 15 FT. cord eliminates the need for additional extension cords and the metal housing lasts a long time.

The Southwire 250 ft. Brown 18-5 Thermostat and Bell Cable is designed for use in heating and air conditioning controls as well as in alarm systems. This cable offers a flat design. The insulation is made of 6 mils of polypropylene and a brown PVC jacket.

Southwire Armorlite Type MC Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90°C dry available in sizes 14 AWG through 2 AWG, and a green insulated grounding conductor. The conductors are cabled together and a binder tape bearing the print legend is wrapped around the assembly. Aluminum interlocking armor is applied over the assembly.