Simpson Strong-Tie
Simpson Strong-Tie® DWA3G2 Quik Drive® Standard Adapter, For Use With DeWALT® 969 Cordless, 267 and 268 Adjustable Torque Screwguns
Simpson Strong-Tie® DWA3G2 Quik Drive® Standard Adapter, For Use With DeWALT® 969 Cordless, 267 and 268 Adjustable Torque Screwguns
Simpson Strong-Tie® LRU26Z Face-Mount Rafter Hanger, 2 x 6 in Joist, 18 ga, Steel, ZMAX® Galvanized
The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.
Simpson Strong-Tie® LUS210 Double-Shear Face-Mount Joist Hanger, 2 x 10 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS24 Double-Shear Face-Mount Joist Hanger, 2 x 4 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS26 Double-Shear Face-Mount Joist Hanger, 2 x 6 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS28 Double-Shear Face-Mount Joist Hanger, 2 x 8 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® QDEXTG2-16 Quik Drive® Short Standard Extension, For Use With G2 Series Auto Feed Screw System, 16 in L
From nose clips to screw quivers, Simpson Strong-Tie provides a variety of accessories for Quik Drive auto feed systems.
Simpson Strong-Tie® TP15 Tie Plate, 5 in L x 1-13/16 in W x 20 ga THK, Steel, Galvanized
Simpson Strong-Tie® straps and plates join and reinforce joints with simple, versatile solutions for a wide range of connections. Available in many lengths, widths and thicknesses, straps can be used on the wide or narrow face of lumber for light repairs or heavy-duty projects. Many straps are designed to be used back-to-back on a piece of lumber without fastener interference.
Recently Viewed
Milwaukee® 48-80-6000 Phenolic Disc, For Use With 7 in Standard Angle Grinders, 5/8-11 Thread, 7000 rpm
Milwaukee® 48-80-6000 Phenolic Disc, For Use With 7 in Standard Angle Grinders, 5/8-11 Thread, 7000 rpm
Browning® PC9301 Waste Pack Kit
DUST BAG FOR BELT SANDER 360/362-POR39331>
Klein® 32394 Heavy Duty Replacement Secondary Blade Barrel, For Use With 32557 Heavy Duty and 32558 Ratcheting Multi-Bit Screwdriver/Nut Driver
This secondary blade barrel replacement works with Klein Tools' 11-in 1 (Cat. No. 32500) and 11-in-1 Magnetic (Cat. No. 32500MAG) Multi-Bit Screwdriver/Nut Drivers. Heavy-duty barrel is made of highest-quality tempered steel for added durability. Precision machined for exact fit into fastener.
RIDGID® 39655 Guide Block, For Use With RIDGID® 141/161 Pipe and Conduit Geared Threader
RIDGID® 39655 Guide Block, For Use With RIDGID® 141/161 Pipe and Conduit Geared Threader
