Schneider Electric

Schneider Electric Square D™ TeSys™ GV2 GV2ME06 Non-Reversing Manual Motor Starter With Thermal Magnetic Circuit Protector, 3 Poles, IP20 Enclosure

The GV2 manual starter and protector provides manual isolation, manual motor control, and thermal overcurrent protection in one compact unit. The basic motor starter GV2ME controls motors with full load currents up to 32 A. The manual starter is three pole with horsepower ratings. The manual starter is operated by push buttons. The Class 10 ambient compensated thermal over current is adjustable from 1 ampere to 1.6 ampere. This device has screw clamp terminals. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine, ATEX).

Schneider Electric Square D™ TeSys™ D LC1D12BD Direct On-Line Standard IEC Contactor, 690 V AC, 24/300 V DC V Coil, 12/25 A, 3NO Contact, 3 Poles

TeSys Deca contactor, 3 poles (3NO), for motor control applications up to 12A/690V AC-3/3e (5.5kW@400V). They can be used to create motor starters for almost any type of application. It provides a 24V DC coil with transient suppressor module, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Contactor is rated for 3HP at 200-208VAC, 3HP at 240VAC, 7.5HP at 480VAC and 10HP at 600VAC three phase. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine). When used with a 480VAC up to 35A circuit breaker, this contactor can have a SCCR up to 85kA. When used with up to a 600VAC 30A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.03 inches tall, 1.77 inches wide and 3.74 inches deep. It weighs 1.07 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards.

Schneider Electric Square D™ Harmony™ 9001KR9RH2Y238 Round Pushbutton, 30 mm, 2NO-2NC Contact, 41 mm Mushroom Head Operator

Schneider Electric Square D™ Harmony™ 9001KR9RH2Y238 Round Pushbutton, 30 mm, 2NO-2NC Contact, Silver Alloy Contact, 41 mm Screw-On Red Plastic Mushroom Operator

Schneider Electric Square D™ Harmony™ 9001KR1BH2Y238 Round Pushbutton, 30 mm, 2NO-2NC Contact

This Harmony 9001K range is a modular flush black push button with a full guard. It features spring return flush push, it has 2 positions with 2 C/O contacts and screw clamp terminals. This flush push button with full guard pros an ergonomic interface for controlling your machines. It is easily installed into a standard 30mm diameter panel cut-outs and connected to control circuits with classic screw-clamp connections. Its schematic is clearly distinguishable thanks to clear colors, minimizing errors during initial wiring and later maintenance operations. It is impact resistant, dust resistant, water resistant and vibration resistant thanks to its IP66, making it ideal for operation in harsh environments. it has a chromium-plated metal bezel. It complies with directives such as RoHS and REACh relating to environmental protection.

Schneider Electric Harmony™ 9001KS11K1 Non-Illuminated Round Selector Switch Operator, 1.18 in, 2 Positions, Black

30mm push button range is robust and offers long term reliability in heavy duty industrial applications and extreme environments. The 9001K operator have a metal operator base and the 9001SK operators have a plastic base. This very broad line of push button operators includes push buttons, emergency stop mushroom head push buttons, selector switches, key operated switches, and operators with potentiometers. Also includes pilot lights (LED, incandescent and neon), joystick controllers, wobble stick operators, and operators with multiple functions. These operators can be purchased as complete operators or as subassemblies that can be assembled by the user to meet specific requirements. The 9001 K metal 30mm push buttons are automatic selfgrounding operators requiring no additional wiring and are ABS Certified. Impact and corrosion resistant metal bezel and body ensures product continues to operate even after severe accidents. Contact blocks have terminal screw shipped back out to speed wiring and has a very large variety of accessories. Some operators have super bright LEDs for high visibility. These operators are IP 66, NEMA 4 rated (heavy duty, oil tight, water proof and dust tight without requiring boots). The 9001SK operators are also NEMA 4X corrosion resistant. The 9001K and 9001SK 30mm push button operators conforms to IEC, UL, CSA, EN and NOM standards. They are CE marked. 30mm Push Buttons are used in the automotive, machine tool, crane and hoist, food and beverage, industrial applications, material handling, petrochemical, wastewater treatment, metallurgy and many more industries.

Schneider Electric Harmony™ 9001K70H7 Type T-K Operator Joystick Controller With Latch, 30 mm, 2NO Contact

Schneider Electric Harmony™ 9001K70H7 Type T-K Operator Joystick Controller With Latch, 30 mm, 2NO Contact

Schneider Electric Harmony™ 9001K54 Ring Nut, For Use With Harmony™ 30 mm K, KX, SK Pushbutton

Schneider Electric Harmony™ 9001K54 Ring Nut, For Use With Harmony™ 30 mm K, KX, SK Pushbutton

Schneider Electric Harmony 9001KS49B Type T-K Dust/Oil/Watertight Heavy Duty Round Waterproof Non-Illuminated Selector Switch Operator, 30 mm, Knob Operator, 3 Positions, Black

This Harmony 9001K, metal selector switch head, with a black standard handle, has 3 positions and operates with a stay-put mechanism. It has a chromium-plated metal bezel. It is easily installed into standard 30mm diameter panel cut-outs and connected to control circuits with classic screw-clamp connections. It features a dust and oil-resistant weatherproof enclosure for indoor and outdoor use. It is impact-resistant, dust-resistant, water-resistant, and vibration-resistant thanks to its NEMA 1/2/3/3R/4/6/12/13 ratings. A dedicated contact block and handle need to be purchased separately. Harmony 9001K is a range of heavy-duty chromium-plated metal pushbuttons, selector switches, pilot lights, and specialty operators.

Schneider Electric Harmony 9001KA1G Style G Push Button Contact Block, 30 mm, 1NO-1NC Contact, 10 A, 600 V AC Contact, Silver Alloy Contact, Clear

Square D™ Harmony™ 9001KA1G Style G Push Button Contact Block, 30 mm, 1NC-1NO Contact, 10 A, 600 VAC Contact, Silver Alloy Contact, Clear

FORNEY 95-PSI TO 125-PSI PRESSURE SWITCH FOR 75556

Pressure switches, float switches, vacuum switches and power pressure switches for control or monitoring of water pumps, compressors, agricultural/irrigation water systems, molding presses, injection molders, grinding machines, machining centers, complex, special machines, HVAC, automotive, food, beverage, healthcare facilities, pharmaceutical and more. Classes 9012, 9013, 9016, 9036, 9037 and 9038.