WERNER® 416 400 Type IA Single Sided Step Ladder, 16 ft H Ladder, 300 lb Load, 15 Steps, Aluminum
The 416 aluminum 16 ft step ladder has a duty rating of 300 pounds and features heavy gauge TOOL-TRA-TOP®. All steps are knee braced and the TRACTION-TRED® steps are slip resistant. The rear rail is a full U channel and a full set of rear horizontals are spaced one per foot.
-
BrandWERNER®
-
UPC051751010930
-
Manufacturer Part Number416
-
CountryUSA
-
Load Capacity300 lb
-
MaterialAluminum
-
TreadRibbed
-
TypeType IA Single Sided
-
Series400
-
Base Spread104 in
-
Number of Steps15
-
Ladder Height16 ft
-
Bottom Width42-1/8 in
- Heavy gauge Tool-Tra-Top® with thick side plates
- Shoulder bolt and lock nut on top hinge, 4 solid aluminum rivets attach top to each rail
- All steps are knee braced
- Slip resistant TRACTION-TRED® steps are double riveted to rails for durability
- Heavy duty internal spreaders
- Full set of rear horizontals spaced one per foot
- Full U-channel rear rails
- Full set of rear horizontals and spaced one per foot
- Slip resistant foot pad
- Optional molded pail shelf kit model no PK76-9
- 13 ft 5 in H maximum standing
- 20 ft H reach
- 7 x 14 in top
- 3-1/8 in front rails
- 1-1/8 in front flange
- 1-3/4 in rear rails
- 1 in rear flange
- 3 in steps
- Aluminum spreader
- 12-5/8 x 15 in W platform
| Competitor Name | Competitor Part Number |
|---|---|
| Fastenal | 2113454 |
-
UNSPSC30191501
-
Includes(2) Drill Holes, (2) Tool Slots and Parts Tray
-
Standards/ApprovalsANSI A14.2 (2007)|OSHA Compliant
Recently Viewed
WERNER® 416 400 Type IA Single Sided Step Ladder, 16 ft H Ladder, 300 lb Load, 15 Steps, Aluminum
The 416 aluminum 16 ft step ladder has a duty rating of 300 pounds and features heavy gauge TOOL-TRA-TOP®. All steps are knee braced and the TRACTION-TRED® steps are slip resistant. The rear rail is a full U channel and a full set of rear horizontals are spaced one per foot.
CM® 657719 Clevlok® Herc-Alloy® Sling Hook With Latch, 3/8 in Trade, 8800 lb Load, 80/100 Grade, Steel Alloy
CM® 657719 Clevlok® Herc-Alloy® Sling Hook With Latch, 3/8 in Trade, 8800 lb Load, 80/100 Grade, Steel Alloy
Justrite® 08300 Horizontal Drum Vent, 2 in NPT/NPS Bung, For Use With 205 L Petroleum Based Solvent Drums, Brass, Brass
Automatic pressure relief ensures safe workplace. No more worrying about pressure building up in your drums. These safety drum vents automatically relieve pressure between 3 and 8 psi (30 to 55 kPa). Vents are tested to allow 61 cubic inch (1-L) of water through a 3/8-in (9.5-mm) pipe nipple in less than 6 seconds. Keep the vent in closed position to prevent flammable vapor from escaping. A built-in flame arrester helps absorb and dissipate heat for added safety. Vacuum relief is automatic on vertically installed vents and manual on horizontally installed vents. Drum vents are FM Approved. For protection and avoidance of high-pressure drum failure while dispelling heat using its flame arrestor.
Wilton® 1010810 Replacement Inner Ring With Dowel Pin, For Use With 400S, 450S, C-1, AW45 and 500S Machinist Bench Vise
Wilton® 1010810 Replacement Inner Ring With Dowel Pin, For Use With 400S, 450S, C-1, AW45 and 500S Machinist Bench Vise
Proto® J848HD Heavy Duty Straight Pipe Wrench, 48 in L, Floating Hook Jaw, Cast Iron Handle, Federal GGG-W-00651D
Proto® J848HD Heavy Duty Straight Pipe Wrench, 48 in L, Floating Hook Jaw, Cast Iron Handle, Federal GGG-W-00651D
CM® 659728 Clevlok® Herc-Alloy® Grab Hook, 1/2 in Trade, 15000 lb Load, 80/100 Grade, Cradle Attachment, Steel Alloy
CM® 659728 Clevlok® Herc-Alloy® Grab Hook, 1/2 in Trade, 15000 lb Load, 80/100 Grade, Cradle Attachment, Steel Alloy
