Regal Rexnord

Morse® 194615 A Plate Ground Sprocket, 28 Teeth, For Use With Model 350 Torque Limiter Model, 120.4 mm OD

Morse® 604102 Adjustment Nut

Morse® 100513 Torque Limiter Disk Spring, For Use With 350A-1/350A-2 Torque Limiter

The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.

Morse® 194617 A Plate Ground Sprocket, 32 Teeth, For Use With Model 350 Torque Limiter Model, 136.65 mm OD

Morse® 194618 A Plate Ground Sprocket, 22 Teeth, For Use With Model 350 Torque Limiter Model, 119.89 mm OD

Morse® 194619 A Plate Ground Sprocket, 24 Teeth, For Use With Model 350 Torque Limiter Model, 130.05 mm OD

Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.

Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.

Morse® 604103 Lock Washer, For Use With Model 350A Plain Bore Torque Limiter

Morse® 100523 Torque Limiter Disk Spring, For Use With 500A-1/500A-2 Torque Limiter

The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.

Morse® 604201 Unbonded Friction Facing

Morse® 194625 A Plate Ground Sprocket, 30 Teeth, For Use With Model 500 Torque Limiter Model, 160.53 mm OD

Morse® 194628 A Plate Ground Sprocket, 26 Teeth, For Use With Model 500 Torque Limiter Model, 168.4 mm OD

Morse® 194630 A Plate Ground Sprocket, 30 Teeth, For Use With Model 500 Torque Limiter Model, 192.79 mm OD

Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.

Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.

Morse® 100522 Pressure Plate, For Use With Model 500A Plain Bore Torque Limiter

Morse® 604101 Unbonded Friction Facing

Connecting link standard has a removable plate with a slip fit on the pins which allows easy assembly and disassembly. Depending on pitch this may be furnished with spring clip or cotter keys.

Morse® markets roller chain featuring greater resistance and increased endurance limit. Morse® shot peens its rollers to create a favorable state of compression residual stress on the surface. This process eliminates surface cracks and blemishes. The chain offered meets the standards required in the marketplace for many applications. Roller chain is available from 1/4 in pitch to 2-1/2 in pitch. Morse® offers standard roller chain in multiple widths to 8 strands up to 2 in pitch. Roller chain accessories such as connecting links are available in slip fit on the pins. This allows for easy assembly . They are also furnished with spring clip or cotter keys, depending on pitch. For heavy applications, we offer an optional connecting link. It has a removable plate with a light press fit on the pins. Regular offset links are used when a chain contains an odd number of links.

Connecting link standard has a removable plate with a slip fit on the pins which allows easy assembly and disassembly. Depending on pitch this may be furnished with spring clip or cotter keys.

Morse® 604001 Unbonded Friction Facing