Regal Rexnord
Morse 28-T #40 TORQUE LIMITER SPROCKETS MRE 350-A-G-4-28
Morse® 194615 A Plate Ground Sprocket, 28 Teeth, For Use With Model 350 Torque Limiter Model, 120.4 mm OD
Morse 350-A TORQUE LIMITER ADJUSTING NUT MRE 604102
Morse® 604102 Adjustment Nut
Morse 350-A TORQUE LIMITER SPRINGS MRE 100513
Morse® 100513 Torque Limiter Disk Spring, For Use With 350A-1/350A-2 Torque Limiter
Morse 350-A-2-TL-3/4-FB TORQUE LIMITERS MRE 350-A-2 X 3/4
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
Morse 350-AG-432-SPKT-PKG SPROCKETS MRE 350-A-G-4-32
Morse® 194617 A Plate Ground Sprocket, 32 Teeth, For Use With Model 350 Torque Limiter Model, 136.65 mm OD
Morse 350-AG-522-SPKT-PKG SPROCKETS MRE 350-A-G-5-22
Morse® 194618 A Plate Ground Sprocket, 22 Teeth, For Use With Model 350 Torque Limiter Model, 119.89 mm OD
Morse 350-AG-524-SPKT-PKG SPROCKETS MRE 350-A-G-5-24
Morse® 194619 A Plate Ground Sprocket, 24 Teeth, For Use With Model 350 Torque Limiter Model, 130.05 mm OD
Morse 350-TL (480) PB TOR/LIMIT BUSHINGS MRE 604106
Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.
Morse 350-TL (540) PB TOR/LIMIT BUSHINGS MRE 604107
Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.
Morse 350-TL TORQUE LIMITER LOCKWASHERS MRE 604103
Morse® 604103 Lock Washer, For Use With Model 350A Plain Bore Torque Limiter
Morse 500-A TORQUE LIMITERS SPRINGS MRE 100523
Morse® 100523 Torque Limiter Disk Spring, For Use With 500A-1/500A-2 Torque Limiter
Morse 500-A-2-TL-1-3/8-FB TORQUE LIMITER MRE 500-A-2 X 1-3/8
The Morse® torque limiter is a protective device that limits torque transmitted in a drive system by slipping when the torque demand exceeds a preset value as a result of shock loads, overloads or machine jams. It automatically re-engages when the overload torque has passed, no resetting is required. The Morse® torque limiter helps prevent machine damage and eliminates costly downtime. Using spring loaded friction surfaces for its operation, the Morse® torque limiter presets slip torque by adjustment of the spring force. This device can be used with a sprocket, gear, sheave or flange plate as the center member that is clamped between two friction facings.
Morse 500-A-FRICTION DISKS--PK/2 MRE 604201
Morse® 604201 Unbonded Friction Facing
Morse 500-AG-530-SPKT-PKG SPROCKETS MRE 500-A-G-5-30
Morse® 194625 A Plate Ground Sprocket, 30 Teeth, For Use With Model 500 Torque Limiter Model, 160.53 mm OD
Morse 500-AG-626-SPKT-PKG SPROCKETS MRE 500-A-G-6-26
Morse® 194628 A Plate Ground Sprocket, 26 Teeth, For Use With Model 500 Torque Limiter Model, 168.4 mm OD
Morse 500-AG-630-SPKT-PKG SPROCKETS MRE 500-A-G-6-30
Morse® 194630 A Plate Ground Sprocket, 30 Teeth, For Use With Model 500 Torque Limiter Model, 192.79 mm OD
Morse 500-TL (480) PB TOR/LIMIT BUSHINGS MRE 604205
Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.
Morse 500-TL (770) PB TOR/LIMIT BUSHINGS MRE 604208
Sintered steel bushing on which the center member and friction facings rides are coated with a dry film lubricant; therefore, no oil is present to contaminate friction facings and reduce torque capacity. The bushing "free floats" on the hub. Morse® offers a wide selection of bushing widths in all torque limiter sizes, permitting close matching of center member and bushing width to minimize bearing pressure and promote longer bushing life.
Morse 500TLPRESSPLATEPB PRESSURE PLATES MRE 100522
Morse® 100522 Pressure Plate, For Use With Model 500A Plain Bore Torque Limiter
Morse TORQUE LIMITER FRICTION DISC--PK/2 MRE 604101
Morse® 604101 Unbonded Friction Facing
Morse® 2361921 Slip Fit Standard Duty Connecting Link With Spring Clip, 25 Chain, 1/4 in Pitch, 0.312 in OAW, 0.0905 in Dia Pin, Steel
Connecting link standard has a removable plate with a slip fit on the pins which allows easy assembly and disassembly. Depending on pitch this may be furnished with spring clip or cotter keys.
Morse® 330806 Standard Roller Chain, 100 ft OAL, 1/2 in Pitch, 0.312 in Dia x 5/16 in W Roller, Steel
Morse® markets roller chain featuring greater resistance and increased endurance limit. Morse® shot peens its rollers to create a favorable state of compression residual stress on the surface. This process eliminates surface cracks and blemishes. The chain offered meets the standards required in the marketplace for many applications. Roller chain is available from 1/4 in pitch to 2-1/2 in pitch. Morse® offers standard roller chain in multiple widths to 8 strands up to 2 in pitch. Roller chain accessories such as connecting links are available in slip fit on the pins. This allows for easy assembly . They are also furnished with spring clip or cotter keys, depending on pitch. For heavy applications, we offer an optional connecting link. It has a removable plate with a light press fit on the pins. Regular offset links are used when a chain contains an odd number of links.
Morse® 331135 Slip Fit Standard Duty Connecting Link With Cotter Pin, 60 Chain, 3/4 in Pitch, 0.99 in OAW, 0.234 in Dia Pin, Steel
Connecting link standard has a removable plate with a slip fit on the pins which allows easy assembly and disassembly. Depending on pitch this may be furnished with spring clip or cotter keys.
Morse® 604001 Unbonded Friction Facing
Morse® 604001 Unbonded Friction Facing
Recently Viewed
Browning 2B110SK V-Belt Sheave Features:
- 11.35 Inch OD.
- Cast Iron.
- Two Groove.
- Q-D.
- Used With SK Series Bushings For A and B Series Belts.
Additional Features:
The Browning 2B110SK is a heavy-duty, two-groove cast iron sheave designed for industrial power transmission using A or B section V-belts. It features a 11.35-inch outside diameter and utilizes a QD Quick Detachable SK bushing system.
3-GRV BANDED C-101 V-BELTS-PIXC101/03>
2-11/16"-ID SPH/OD INSERT BEARINGS-GN211KRRB>
