Regal Rexnord

TB Wood's® L100114 Straight L-Jaw Coupling Hub, L100 Coupling, 1-1/4 in Bore, 1.38 in, 2.53 mm Hub, Sintered Carbon Steel

TB Wood's® L100118 Straight L-Jaw Coupling Hub, L100 Coupling, 1-1/8 in Bore, 1.38 in, 2.53 mm Hub, Sintered Carbon Steel

TB Wood's® L10015/16 Straight L-Jaw Coupling Hub, L100 Coupling, 15/16 in Bore, 1.38 in, 2.53 mm Hub, Sintered Carbon Steel

TB Wood's® L095118 Straight L-Jaw Coupling Hub, L095 Coupling, 1-1/8 in Bore, 1 in, 2.11 mm Hub, Sintered Carbon Steel

TB Wood's® L0901 Straight L-Jaw Coupling Hub, L090 Coupling, 1 in Bore, 0.81 in, 2.11 mm Hub, Sintered Carbon Steel

TB Wood's® L09058 Straight L-Jaw Coupling Hub, L090 Coupling, 5/8 in Bore, 0.81 in, 2.11 mm Hub, Sintered Carbon Steel

TB Wood's® L0909/16 Straight L-Jaw Coupling Hub, L090 Coupling, 9/16 in Bore, 0.81 in, 2.11 mm Hub, Sintered Carbon Steel

TB Wood's® L09012 Straight L-Jaw Coupling Hub, L090 Coupling, 1/2 in Bore, 0.81 in, 2.11 mm Hub, Sintered Carbon Steel

TB Wood's® L0907/16 Straight L-Jaw Coupling Hub, L090 Coupling, 7/16 in Bore, 0.81 in, 2.11 mm Hub, Sintered Carbon Steel

TB Wood's® L0757/16 Straight L-Jaw Coupling Hub, L075 Coupling, 7/16 in Bore, 0.81 in, 1-3/4 in Hub, Sintered Carbon Steel

TB Wood's® L05058 Straight L-Jaw Coupling Hub, L050 Coupling, 5/8 in Bore, 0.63 in, 1.08 in Hub, Sintered Carbon Steel

TB Wood's® L05012 Straight L-Jaw Coupling Hub, L050 Coupling, 1/2 in Bore, 0.63 in, 1.08 in Hub, Sintered Carbon Steel

TB Wood's® L03538 Straight L-Jaw Coupling Hub, L035 Coupling, 3/8 in Bore, 0.27 in, 0.63 in Hub, Sintered Carbon Steel

TB Wood's® L03514 Straight L-Jaw Coupling Hub, L035 Coupling, 1/4 in Bore, 0.27 in, 0.63 in Hub, Sintered Carbon Steel

Morse® 341659 Replacement Chain

Morse® 080549 Double Roller Chain, 5/8 in Pitch, Steel

Morse® 341657 Double Roller Chain, Steel

Browning® stock sprockets for extended pitch chain have larger pitch diameters than standard roller chain sprockets as extended pitch chain will not operate satisfactorily on standard roller chain sprockets with less than 24 teeth. They will normally operate satisfactorily on standard roller chain sprockets with 24 or more teeth. Sprockets for extended pitch chain with large rollers are available on special order.

Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.

Browning® cast iron bevel and spiral bevel gear reducers are constructed of rugged cast iron housings. These housings are line bored for precise gear and bearing alignment. To offer maximum performance, these reducers are designed with tapered roller and ball bearings. Browning® cast iron bevel and spiral bevel gear reducers are available in six sizes and ratios. These range from 1:1 to 3:1, with speed-up ratios available. Torque capacity ranges from 99 to 5942 in-lb.

Marathon® 048S17D2107 Drip Proof Split Phase Fan and Blower Motor, 1/4 hp, 115 VAC, 60 Hz, 1 ph, 48Z Frame, 1725 rpm, Base Mount, DP Enclosure

Morse® XE9006 Adjustable Torque Arm Kit, 206-375 Size, For Use With Raider® Plus 2.06 to 3.75 in Center Distance Worm Gear Reducer

Browning® 3151024 SF Series Standard Duty Take-Up Frame, 9 in Travel, 15-3/8 in OAL, 11-3/8 in W Base, 14-3/8 in L Bolt Center-to-Center, 3-11/16 in W Bolt Center-to-Center

Browning® 3150992 SF Series Standard Duty Take-Up Frame, 9 in Travel, 14-1/2 in OAL, 4-1/16 in W Base, 13-1/2 in L Bolt Center-to-Center, 3-3/16 in W Bolt Center-to-Center