Browning® 1070333 Split Taper Bushing, 2-3/4 in Dia Bore, 3-7/8 in Small End/4 in Large End Dia Barrel, 5-3/8 in Dia Flange, 2-7/8 in OAL, Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
-
BrandBrowning®
-
UPC662289100668
-
Manufacturer Part Number1070333
-
CountryUSA
-
MaterialSteel
-
Flange Diameter5-3/8 in
-
Flange Thickness5/8 in
-
Screw Size3/8 x 1-3/4 in
-
Number of Bolt Holes3
-
Barrel Diameter3-7/8 in Small End/4 in Large End
-
Keyway Size5/8 x 5/16 in
-
Bolt Circle Diameter4-5/8 in
-
Bore Diameter2-3/4 in
-
Overall Length2-7/8 in
-
Suitable For Use WithBrowning® Multiple Groove Sheave
- Solid Flange and Double Split Barrel - Assures better concentricity to the shaft
- Key to Key Drive - With keys on both the shaft and product to provide the strongest possible drive
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
- Miter Gears must be run in sets of two or more gears with the same pitch, Pressure angle and number of teeth
- Spiral Bevel and Miter Gears have continuous pitch line contact and are smoother and quieter than straight tooth gears
- 3/4 in per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product
-
Alternative Part NumberR1 2 3/4
-
UNSPSC31171605
-
Package DescriptionEACH
-
Warranty1 Year
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Browning® 1070333 Split Taper Bushing, 2-3/4 in Dia Bore, 3-7/8 in Small End/4 in Large End Dia Barrel, 5-3/8 in Dia Flange, 2-7/8 in OAL, Steel
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
Drillco 700A104 Jobber Length Drill Bit, 1/16 in Drill - Fraction, 0.0625 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
700 series solid carbide drills retain hardness and sharp edges at high temperature. Their abrasion-resistant qualities make them advantageous for drilling abrasive materials. They offer the advantage of extreme rigidity for greater drilling accuracy.
Gates® Power Transmission Predator® AP66 Heavy Duty V-Belt, AP Section, 1/2 in W Top, 68 in L Outside, 5/16 in THK, Chloroprene
Specifically designed for aggressive applications, this extra heavy duty belt construction provides extraordinary high impact strength, capacity and wear resistance.
MORSE® 50998 5374 Standard Length Jobber Length Drill Bit, 12 mm Drill - Metric, 0.4724 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
MORSE® 50998 5374 Standard Length Jobber Length Drill Bit, 12 mm Drill - Metric, 0.4724 in Drill - Decimal Inch, 118 deg Point, Solid Carbide, Bright
MORSE® 11608 1330B General Purpose Jobber Length Drill Bit, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
MORSE® 11608 1330B General Purpose Jobber Length Drill Bit, 1/8 in Drill - Fraction, 0.125 in Drill - Decimal Inch, 118 deg Point, HSS, Bright
MORSE® 11430 1330 General Purpose Jobber Length Drill Bit, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
MORSE® 11430 1330 General Purpose Jobber Length Drill Bit, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
