RBC Bearings Incorporated
RBC Bearings 3/4"-OD HEX SEALED CAM FOLLOWERS RBC S-24-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 3/4"-OD SEALED YOKE ROLLERS RBC Y-24-L
RBC® Y24L Universal Series™ Yoke Cylindrical Roller Cam Follower, 1/4 in Dia Bore, 3/4 in Dia x 1/2 in W Roller, 4150 lb Load, Chrome Steel Roller
RBC Bearings 3/8"-ID FLANGED BALL BEARINGS RBC 5368-VMF-53
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
RBC Bearings 4-1/4"-ID NEEDLE ROLLER BEARINGS RBC SJ-9728
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
RBC Bearings 5/8" HEX SEALED CAM FOLLOWERS RBC S-20-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 5/8"-OD HEAVY HEX CAM FOLLOWERS RBC H-20-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 7/8" HEAVY CAM FOLLOWER RBC H-28-L
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 7/8" SLOTTED SEALED CAM FOLLOWER RBC S-28-L
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
RBC Bearings 7/8"-ID NEEDLE BEARING INNER RACES RBC IR-7214
RBC® IR7214 Pitchlign® Heavy Duty Inner Ring, 7/8 in ID x 1-1/8 in OD, 1.01 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings 7/8"-ID NEEDLE BEARINGS RBC SJ-7173
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
RBC Bearings 7/8"-ID SPHERICAL BUSHINGS RBC B-14-L
RBC® has been a pioneer in spherical plain bearing technology since inventing the fractured outer race design many years ago. Since that time, RBC® has continued to introduce industry leading innovations such as high misalignment, angular contact, extended inner ring, tapered bore, and extended lubrication groove spherical plain bearing designs.
RBC Bearings 7/8"-OD SEALED YOKE ROLLERS RBC Y-28-L
RBC® Y28L Universal Series™ Yoke Cylindrical Roller Cam Follower, 1/4 in Dia Bore, 7/8 in Dia x 1/2 in W Roller, 4150 lb Load, Chrome Steel Roller
RBC Bearings NEEDLE BEARING INNER RACE RBC IR-8517-C
RBC® IR8517C Pitchlign® Heavy Duty Inner Ring, 2-1/2 in ID x 3 in OD, 1.76 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings NEEDLE BEARING INNER RACES RBC IR-7285
RBC® IR7285 Pitchlign® Heavy Duty Inner Ring, 1-1/4 in ID x 1-9/16 in OD, 1.26 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings NEEDLE BEARING INNER RACES RBC IR-8407
RBC® IR8407 Pitchlign® Heavy Duty Inner Ring, 1-3/4 in ID x 2-1/4 in OD, 1.76 in OAW, For Use With Precision Ground Heavy Duty Needle Roller Bearings, 52100 Steel
RBC Bearings NEEDLE ROLLER BEARING RBC 6-NBF-817-YJ
RBC® 6NBF817YJ NBF Airframe Bearing, Needle Roller Bearing, 3/8 in Dia Bore, 1-1/16 in OD, 1/2 in W, 3600 lb Load
RBC Bearings NEEDLE ROLLER BEARINGS RBC SJ-7194
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
RBC Bearings NEEDLE ROLLER BEARINGS RBC SJ-7285
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
RBC Bearings UNGROUND THRUST BALL BEARINGS RBC 608-VBF-53
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
RBC Bearings UNGROUND THRUST BALL BEARINGS RBC 610-VBF-53
The 600® Series bearing is designed for moderate speeds and medium thrust loads. These bearings utilize a full ball complement. Rings are cold forged from hardenable strip steel and are carefully heat treated. These bearings may be plated or manufactured from stainless steel upon request. The entire assembly is housed in a soft steel band which lends itself to an easy press fit into a housing. The band also serves as a dust shield and helps retain the bearing lubricant. The upper ring is free to rotate in the band and has a close fit in the bore for the shaft. The lower ring is fixed in the band and has a shaft clearance in the bore.
RBC Bearings YOKE CAM FOLLOWER BEARINGS RBC SRF-45-SS
Caged roller followers provide large internal grease storage capacity for applications where relubrication is infrequent. Cage guided rollers and a very heavy outer ring cross section permit operation at high loads and high speeds. Caged roller followers are avail able with and with out seals. The unsealed design provides the additional advantages of very low friction to prevent skidding in lightly loaded applications and provides for flow-through lubrication. Caged roller followers normally mount directly on a hardened and ground pin. RBC® offers a line of Precision Ground Inner Rings to simplify application of caged roller followers.
RBC Bearings YOKE CAM FOLLOWER ROLLER BEARINGS RBC SRF-20
Caged roller followers provide large internal grease storage capacity for applications where relubrication is infrequent. Cage guided rollers and a very heavy outer ring cross section permit operation at high loads and high speeds. Caged roller followers are avail able with and with out seals. The unsealed design provides the additional advantages of very low friction to prevent skidding in lightly loaded applications and provides for flow-through lubrication. Caged roller followers normally mount directly on a hardened and ground pin. RBC® offers a line of Precision Ground Inner Rings to simplify application of caged roller followers.
RBC Bearings YOKE CAM FOLLOWER ROLLER BEARINGS RBC SRF-20-SS
Caged roller followers provide large internal grease storage capacity for applications where relubrication is infrequent. Cage guided rollers and a very heavy outer ring cross section permit operation at high loads and high speeds. Caged roller followers are avail able with and with out seals. The unsealed design provides the additional advantages of very low friction to prevent skidding in lightly loaded applications and provides for flow-through lubrication. Caged roller followers normally mount directly on a hardened and ground pin. RBC® offers a line of Precision Ground Inner Rings to simplify application of caged roller followers.
RBC Bearings YOKE CAM FOLLOWER ROLLER BEARINGS RBC SRF-45
Caged roller followers provide large internal grease storage capacity for applications where relubrication is infrequent. Cage guided rollers and a very heavy outer ring cross section permit operation at high loads and high speeds. Caged roller followers are avail able with and with out seals. The unsealed design provides the additional advantages of very low friction to prevent skidding in lightly loaded applications and provides for flow-through lubrication. Caged roller followers normally mount directly on a hardened and ground pin. RBC® offers a line of Precision Ground Inner Rings to simplify application of caged roller followers.
Recently Viewed
Irwin® Vise-Grip® 22 18SP® Standard Locking C-Clamp, Nickel Plated, 9-1/2 in D Throat, 8 in Jaw Opening, 18 in L Jaw, Heat Treated Alloy Steel
The IRWIN VISE-GRIP Original Locking C-Clamp with Swivel Pads, features 8"-wide jaw opening for more versatility and the ability to clamp a variety of items with just one tool. Pressure and fit can be adjusted with the turn screw that stays adjusted for repetitive use. Constructed of high-grade, heat-treated alloy steel for maximum toughness and durability, these small C-Clamps have swivel pads to protect work surfaces and the classic trigger release design that maintains maximum locking force where you need it..
Klein's Mini Screwdriver, 3/32-Inch Cabinet Tip, provides professionals with a precise formed tip screwdriver for an exact fit in small screw applications. Its Cushion-Grip™ handle provides greater torque and comfort. Specially heat-treated for added durability and a long tool life.
The M18™ 1/2 in. brushless hammer drill/driver delivers the most power in its class while maintaining compact size. This hammer drill driver 725 in-lbs of torque and 0-550 / 0-1, 800 RPM, for a wide range of drilling and fastening applications. The Milwaukee built brushless motor, REDLINK™ electronics and REDLITHIUM™ batteries provides more efficient power delivery, for fewer trips to the charger. At only 7.0 in. long and 4.6 lbs. (with battery), this hammer drill provides excellent control and balance in a compact size, perfect for work overhead or in tight spaces. An all-metal gear case and 1/2 in. metal chuck provides maximum durability.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Machined type Needle Roller Bearings feature low sectional height and large load ratings. A highly rigid outer ring makes these bearings ideal for light alloy housings as well.
Milwaukee® M18™ 2648-20 Cordless Random Orbit Sander, 5 in Dia Wheel, 18 V DC, 7000 to 12000 opm, Li-Ion Battery
The MILWAUKEE® M18™ Random Orbit Sander delivers corded power, more control, and fast material removal for users who need a portable solution with professional performance. With a 12,000 Max OPM output and 7,000-12,000 variable speed control, the sander lets you match orbit speed to the application for efficient material removal and precise finishing, while the 3/32" orbit diameter produces a high-quality finish. Integrated dust control minimizes dust build-up using the included dust bag or the universal hose adapter, and the quick-change 5" hook & loop sanding pad allows for fast abrasive changes to keep you productive. Includes (1) 2648-20 M18 5" Random Orbital Sander, (1) Dust Bag, (1) Universal Hose Adapter, and (2) 80 Grit Sanding Discs. Powered by REDLITHIUM™ battery technology, the sander delivers over 20 minutes of run-time on an M18™ REDLITHIUM™ XC5.0 Battery Pack (Battery Sold Separately), and it is part of the M18™ System of 250+ tools, backed by a 5 Year Limited Warranty.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Shell type Needle Roller Bearings are lightweight, low profile motion components designed to handle either high speeds or heavy loads, depending on the configuration. An outer ring made of high strength steel enables a streamlined profile with the lowest sectional height of all the Needle Roller Bearings.
