RBC Bearings YOKE CAM FOLLOWER ROLLER BEARINGS RBC SRF-20-SS
Caged roller followers provide large internal grease storage capacity for applications where relubrication is infrequent. Cage guided rollers and a very heavy outer ring cross section permit operation at high loads and high speeds. Caged roller followers are avail able with and with out seals. The unsealed design provides the additional advantages of very low friction to prevent skidding in lightly loaded applications and provides for flow-through lubrication. Caged roller followers normally mount directly on a hardened and ground pin. RBC® offers a line of Precision Ground Inner Rings to simplify application of caged roller followers.
-
BrandRBC®
-
UPC637400006426
-
Manufacturer Part NumberSRF 20 SS
-
CountryUSA
-
Load Capacity1300 lb
-
Temperature Rating0 to 250 deg F
-
FinishUncoated
-
Maximum Speed7600 rpm
-
Closure TypeDouble Seal
-
TypeCaged
-
Roller Diameter1 in
-
Roller MaterialChrome Steel
-
Roller Width0.62 in
-
SeriesSRF
-
Bore Diameter1/2 in
-
Overall Width0.62 in
- Designed with large internal grease storage capacity for applications where relubrication is infrequent
- Cage guided rollers and a very heavy outer ring cross section permit operation at high loads and high speeds
- Double sealed to keep grease in and contaminants out
- 1200 lb dynamic/1300 lb static
- Flat outside ring
- Without stud
- Dynamic Load Bearing is 1200 lb
- Enclosure Type Double Seal
- Outer Diameter is 1 in
- Product Weight is 0.076 lbs
- Style Caged
-
UNSPSC31171530
-
Package Description1/PK
-
Standards/ApprovalsANSI/ABMA Standard 25|ASPR|CAS|DFAR|FAR Standards
-
Warranty90 Days
-
Catalog
Recently Viewed
Caged roller followers provide large internal grease storage capacity for applications where relubrication is infrequent. Cage guided rollers and a very heavy outer ring cross section permit operation at high loads and high speeds. Caged roller followers are avail able with and with out seals. The unsealed design provides the additional advantages of very low friction to prevent skidding in lightly loaded applications and provides for flow-through lubrication. Caged roller followers normally mount directly on a hardened and ground pin. RBC® offers a line of Precision Ground Inner Rings to simplify application of caged roller followers.
IKO manufactures a wide range of radial Needle Roller Bearings to meet the needs of different applications and machine profiles. These include shell type bearings, needle roller cages for both general use and within engine connecting rods and machined type Needle Roller Bearings. Machined type Needle Roller Bearings feature low sectional height and large load ratings. A highly rigid outer ring makes these bearings ideal for light alloy housings as well.
Armstrong® 11-848 Flare Nut Crowfoot Wrench, 1 in Open End Wrench, 3/8 in Drive, ASME B107.21, Polished Chrome
Armstrong® 11-848 Flare Nut Crowfoot Wrench, 1 in Open End Wrench, 3/8 in Drive, ASME B107.21, Polished Chrome
5-GRV BANDED 5-V-1500 V-BELT 150"-PIX5V1500/05 >
The robust Contender EDGE 2.0 Outfit comes with everything you need to get started: CA2460+ cutting attachment, WH315FC+ welding handle, cutting tip, striker, hose, welding nozzle, heating nozzle and two EDGE 2.0 regulators.
United Abrasives-SAIT 23252 Thin High Speed Cut-Off Wheel, 7 in Dia x 0.035 in THK, 1-1/4 in Center Hole, A36T Grit, Aluminum Oxide Abrasive
