RBC Bearings 5/8" HEX SEALED CAM FOLLOWERS RBC S-20-LW
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
-
BrandRBC®
-
UPC637400007553
-
Manufacturer Part NumberS20LW
-
CountryUSA
-
Load Capacity1060 lb Dynamic/1700 lb Static
-
Temperature Rating250 deg F
-
FinishBlack Oxide
-
Thread Length0.313 in
-
Thread Size1/4-28 UNF-2A
-
Maximum Speed5000 rpm
-
Closure TypeSealed
-
TypeNeedle Roller
-
Roller Diameter5/8 in
-
Roller MaterialChrome Steel
-
Roller Width0.438 in
-
Head TypeHex
-
SeriesS-LW
-
Stud Diameter1/4 in
-
Stud Length3/4 in
-
Stud MaterialChrome Steel
-
Stud TypeStandard
- Inventory reduction of about 50%
- Allows relubrication in tight spots or when stud access is limited
- HexLube® universal cam follower can eliminate the need to stock screwdriver slots or unsealed cam followers
- Heavy stud cam followers are designed to provide additional stud strength for applications with high loading or shock loads
- Standard stud cam followers offer the mounting convenience of a threaded stud and are designed to accommodate moderate loads
- Double sealed to keep grease in and contaminants out
-
UNSPSC31171530
-
Package Description1/PK
-
Standards/ApprovalsANSI/ABMA Standard 11|ASPR|CAS|DFAR|FAR Standards
-
Warranty90 Days
-
Catalog
Recently Viewed
Needle Roller Cam Followers have a heavy outer ring cross section and a full complement of needle rollers. They offer high dynamic and static load carrying capability, and anti-friction performance, in a compact design. They are used as track rollers, cam followers, and in a wide range of linear motion systems.
EXTRA-FOAMY-17OZ-AEROSOL-80017FL-TAP80017 >
2-1/2" -FEMALE PIPE THREAD METAL GALVANIZED TEE-FIT21/2GT >
1-1/4" X 2-1/2" HD RECT DIE SPRING-LANSHDR1250250 >
3 GROOVE BANDED B-195 V-BELT-JAS3RB195 >
MORSE® 57919 5943 Center Cutting Single End Mill, 19/64 in Dia Cutter, 13/16 in Length of Cut, 4 Flutes, 5/16 in Dia Shank, 2-1/2 in OAL, Bright
