RBC Bearings 7/8"-ID NEEDLE BEARINGS RBC SJ-7173
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
-
BrandRBC®
-
UPC637400014339
-
Manufacturer Part NumberSJ7173
-
CountryUSA
-
Load Capacity6700 lb
-
Cage MaterialSteel
-
Temperature Rating-40 to 300 deg F
-
Maximum Speed15000 rpm
-
Closure TypeOpen
-
TypeHeavy Duty
-
Width3/4 in
-
SeriesPitchlign® SJ Series
-
Number of Rows1
-
Bearing Material52100 Steel
-
Outside Diameter1-3/8 in
-
Bore Diameter7/8 in
- Long life, caged roller bearing
- Rollers guided by cage for reduced misalignment and reduced friction
- Precision ground on all surfaces
- Compact design allows for high load capacity and small cross section
- Unsealed design for maximum capacity
- 4700 lb dynamic/6700 lb static
-
UNSPSC31171512
-
Package Description1/PK
-
Standards/ApprovalsASPR|CAS|DFAR|FAR Standards|MS51961
-
Warranty90 Days
-
Catalog
Recently Viewed
The RBC® SJ series of Pitchlign® heavy duty needle roller bearings are supplied in standard envelopes in both sealed and unsealed configurations. There are eight possible seal configurations. The seals can include double or single seal with the seal lip turned inward or outward. The seal can be mounted in the radius end of the ring or the chamfered end of the ring for optimum mounting variations.
BBI 847668 Fully Threaded Cap Screw, 1-8, 3 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847668 Fully Threaded Cap Screw, 1-8, 3 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
3/4" EMT ELECTRICAL CONDUIT (FT)-ATB3/4EMT>
ELECTRIC WIRE TERMINALS-DEL432115 >
Gardner Bender 10-126 Butt Splice, 12 to 10 AWG Conductor, 1.04 in L, Yellow
The DWE402N 4-1/2 in (115 mm) small angle grinder W/ no lock-on features three powerful systems for maximizing performance such as the dust ejection system for preventing damaging dust from entering the tool, one-touch Guard™ for 360 deg rotation, and Quick-Change™ wheel release for easy wheel removal.
