Parker Hannifin
Parker® H5E Industrial Interchange General Purpose Straight Through Quick Disconnect Nipple, 3/8 in, Quick Connect Coupler x Hose Barb, 300 psi, Steel, Domestic
Parker® H5E Industrial Interchange General Purpose Straight Through Quick Disconnect Nipple, 3/8 in, Quick Connect Coupler x Hose Barb, 300 psi, Steel, Domestic
Parker® 921999 12AT Spin-On Replacement Canister, 20 gpm, Cellulose Filter Media, 10 micron Filter Rating
Using Parker's 12AT and 50AT series replacement spin-on cans guarantees Parker's quality of filtration. Using aftermarket filters with unknown media quality may save initial cost, but can increase overall costs by requiring more element change outs, more waste and potentially causing system downtime. Protect your investment by always buying genuine Parker® replacement elements.
Parker® 8F4OMXS F4OMX Triple-Lok® Straight Tube to Pipe Adapter, 1/2 in x 3/8-19 Nominal, 37 deg Male JIC Flare x Male BSPP End Style, Steel
Parker's 37 deg flare JIC tube fittings and adapters, Triple-Lok®, meet the requirements of both SAE J514 and ISO 8434-2 and offer the industry's broadest offering of port ends. The design has a small metal to metal seal area which results in a compact design, low assembly torque, high temperature and high pressure capability.
Parker® 16F4OMXS F4OMX Triple-Lok® Straight Tube to Pipe Adapter, 1 in x 1-11 Nominal, 37 deg Male JIC Flare x Male BSPP End Style, Steel
Parker's 37 deg flare JIC tube fittings and adapters, Triple-Lok®, meet the requirements of both SAE J514 and ISO 8434-2 and offer the industry's broadest offering of port ends. The design has a small metal to metal seal area which results in a compact design, low assembly torque, high temperature and high pressure capability.
Parker® 14R113FC Miniature Regulator, 1/4 in, 15 scfm Flow Rate, 125 psi Pressure
Parker® 14R113FC Miniature Regulator, 1/4 in, 15 scfm Flow Rate, 125 psi Pressure
Parker® 12F4OMXS F4OMX Triple-Lok® Straight Tube to Pipe Adapter, 3/4 in x 3/4-14 Nominal, 37 deg Male JIC Flare x Male BSPP End Style, Steel
Parker's 37 deg flare JIC tube fittings and adapters, Triple-Lok®, meet the requirements of both SAE J514 and ISO 8434-2 and offer the industry's broadest offering of port ends. The design has a small metal to metal seal area which results in a compact design, low assembly torque, high temperature and high pressure capability.
Recently Viewed
.070" CONV 90-DEG SNAP RING PLIERS-ARS68009>
1/4" BALL END KEY - ALL58320 >
Proto® TorquePlus™ J07526M Standard Length Socket, Metric, 3/4 in Square Drive, 26 mm
Proto® TorquePlus™ J07526M Standard Length Socket, Metric, 3/4 in Square Drive, 26 mm
Proto® J10014SS Standard Length Socket, Imperial, 1 in Square Drive, 7/8 in
Proto® J5420S Standard Length Socket, Imperial, 1/2 in Square Drive, 5/8 in
Milwaukee® 48-20-5040 Heavy Duty Thin Wall Core Bit, 2-1/2 in Drill - Fraction, 2.5 in Drill - Decimal Inch
Milwaukee's Carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thin wall core bits ranges from 2-13/16 in. to 3-3/16 in. The thin wall construction is ideal for smaller hammers and newer concrete. The inside core must be removed by the operator before deeper drilling can be accomplished. Multiple extensions and adapters are available to allow for deeper holes to be drilled. The appropriate drive shank must be used to drive the core bit. Use of center pin and guide plate is recommended for positioning and starting a 1-1/4 in. hole and larger. Use of center pin and guide plate is not recommended for positioning and starting a 1-1/8 in. hole or smaller. Milwaukee Carbide tipped core bits are available from 1 in. to 6 in. diff. Includes core bit centering pin and guide plate.
