Milwaukee Tool

Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.

Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.

2-3/4" DIAMOND CONCRETE CORE BIT - MWK48162756>

2-5/8" THREADED TUNNEL HAMMER BIT - MWK48205087>

Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.

Milwaukee® Aviation snips are built for long life and durability. Forged blades deliver up to 10X more cuts than cast blades. Bolt lock ensures the blades won't loosen and chrome plating provides rust protection. The flush pivot bolt won't hang up on material for easy use. The metal lock secures the tool for storage and is easily operated with one hand. The offset models features a 45 degree offset handle for clearance over the cut material. The 2 pc. set includes left offset and right offset aviation snips.

This 2-piece chrome plated steel floor wand accepts 14 in major floor tool 49-90-1840 using a spring loaded snap lock. This wand fits 1-1/2 in ID hoses.

This hard working 2.4 Volt Nickel-Cadmium battery powers Milwaukee® cordless screwdrivers and caulking guns. More power in a compact design. Works with the 48-59-0300, 120 V 1-hr charger or the 48-59-0181 12 Volt vehicle charger. 1.3 A hour battery no memory effect full battery capacity is always available Ni-cad battery for use with Milwaukee® 2.4 V cordless tools.

2.4-VOLT CORDLESS SCREWDRIVER KIT WITH 2" BATTERIES-MWK654722 >

2.4-VOLT 2-SP CORDLESS SCREWDRIVER-MWK65466 >

2" DIAMOND CONCRETE CORE BITS-MWK48162013 >

2" DIAMOND CONCRETE CORE BITS-MWK48162014 >

Milwaukee® selfeed drill bits deliver speed and Endurance for repetitive drilling of large holes. Designed for any trade that demands woodcutting for installing pipe and conduit, selfeed bits feed into work without pressure and provide faster boring of clean, accurate holes. The bits have improved balance with reduced runout, while the hex shank provides a secure gripping surface for the drill chuck. Every Milwaukee® selfeed drill bit is coated with a rust inhibitor. Built to last and designed to perform, these selfeed bits are resharpenable so you can keep them cutting like new.

Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 peak horsepower with a 300 rpm or 600 rpm operating speed. The 4004 has a clutch to protect gears and motor against overload. This unit will handle core bits from 4 to 14 in Dia.

Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 A model features 4.8 hp peak with a 300 rpm or 600 rpm operating speed. The 4079 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 4 to 14 in Dia.

Diamond coring motors are used with Vac-U-Rig® and Dymo-Rig diamond core rigs to drill holes into reinforced concrete. This 20 amp model features 4.8 peak horsepower with a 450 RPM or 900 RPM operating speed. The 4094 uses a shear pin to protect gears and motor against overload. Shear pins are easily replaced and extra pins are included with the unit. This unit will handle core bits from 2 in. to 10 in. in diameter.

Black 25 ft L neoprene lined, wire reinforced, oil resistant 1-1/2 in ID hose has 2-molded cuff ends. Molded ends fit into swivel end or compression fit connectors which are ordered separately.

Get professional-grade performance and longer blade life with the Milwaukee® 5 in. 24 TPI bi-metal jig saw blade (5-Pack). These heavy-duty blades last longer than high-speed steel or carbon blades, combining the strength to cut metal with the durability to withstand impacts without breaking. With Milwaukee's attention to blade material, tooth shape and sharpness, the jig saw blades produce clean, fast cuts in metal under 1/8 in. thick. This blade has a universal tang and fits Milwaukee jig saw model 6256-6 and other popular brands.

Soft side contractor bag made of tough water resistant 600 denier material. Provides extra storage for job site tools and accessories. Shoulder strap or dual handle straps for easy carrying. Durable zipper closure. 24-1/2 in. long by 13 in. wide by 14 in. high.

This Milwaukee Quik-Lok® cord is a three wire grounded 25 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.

This Milwaukee® QUIK-LOK® cord is a three wire grounded 25 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee® tools with the QUIK-LOK® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove. To re-attach a new cord line up the pins in the end of the tool with the pin receptacles in the end of the cord, push together and turn the collar clockwise to lock in place. Cord has a L5-20P NEMA type plug.

Convenient depth control on every screw. The self-drill fastener screwdriver is the ideal tool for controlled depth fastening in a variety of applications. The ramp-off depth locator provides easy, no-slip depth adjustments for consistent driving, while the ergonomic, tactile grip and two-finger trigger enhance your comfort and balance. The all metal gear case and diaphragm are designed for high durability. Use the removable belt clip with bit storage for increased portability and convenience on the jobsite.

Handle the toughest jobs with maximum power, speed and runtime. The M28™ cordless Lithium-Ion 1/2 in impact wrench combines 325 ft-lb of torque with 1450 rpm and 2450 bpm to complete heavy duty applications. It's powered by the revolutionary M28™ Lithium-Ion battery, which provides upto 2X more runtime than 18 V batteries. The magnesium gear case offers extreme jobsite durability and lighter weight. The M28™ 1/2 in impact wrench features non-slip, soft-grip surfaces that reduce vibration for comfort and less fatigue during prolonged use. The forward/reverse shuttle is helpfully located above the variable-speed switch for fast, easy access, while the detent kit ensures quick changes as well as superior socket retention. A hanger bracket and heavy duty steel ring are included for convenient tethering when working high overhead or for raising/lowering the tool when working from a ladder or utility pole.

The Milwaukee 0779 28 Volt 1/2 in. impact wrench delivers 325 ft. lbs of maximum torque. Powering the 0779 is the revolutionary 28 Volt lithium-ion battery pack exclusively from Milwaukee. Combining high torque with 1,450 RPM and 2,450 ipm, the 0779 provides the power, speed and run-time to drive larger lags, drill bigger holes, and remove larger nuts. The powerful Milwaukee 28 V motor makes breaking loose stuck nuts a breeze. The heavy-duty magnesium mechanism housing provides extreme job-site durability. The 0779 comes equipped with comfortable non-slip, soft-grip surfaces that reduce vibration and fatigue. The forward/reverse shuttle is conveniently located above the variable speed switch for fast, easy access. Designed for heavy-duty use, whether driving large lag screws, anchors and bolts, drilling large holes, or removing lug nuts, the 0779 provides the power, comfort and run-time to finish the job. A heavy-duty steel ring (included) can be attached for convenient tethering when working high overhead or for raising/lowering the tool when working from a ladder or utility pole.