Milwaukee Tool

Milwaukee® diamond coring bits - "Dymobits" are designed to optimize drilling performance over a broad range of applications. We define drilling performance as the best balance of speed, life and overall drilling costs. State-of-the-art manufacturing techniques and the latest diamond matrix technology result in a complete line of bits to meet your most demanding requirements.

3/4" X .014 X 1/4"-SHANK KNOT END WIRE BRUSH - MWK48521030 >

Two cutter spline bits have a series of 12 spline that slide into an equal but opposite set of spline in the drive system of the spline drive hammer. This positive engagement of spline to spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in two cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 3/8 in. to 1-1/2 in. diameters as well as metric diameters. One per package.

Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cutting asphalt or hard ground (do not use for concrete). This chisel is specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.

Milwaukee®'s spline 2-cutter rotary hammer drill bits are used for drilling intro brick, block, and concrete.

3/8" (3/8" -24) DRILL CHUCKS-MWK48660795 >

3/8" 100-RPM ELECTRIC DRILL-MWK02291>

Get maximum versatility in this 3/8 in workhorse drill. The 3/8 in Magnum® drill with all metal chuck and QUIK-LOK™ cord features a powerful motor for optimal speed and torque for hole saws, twist bits and light fastening jobs. The all metal gear case and diaphragm provide high durability on the jobsite the ergonomic, tactile grip and two finger trigger optimize your comfort and balance. Add the convenience and extra grip strength of the Grip-Lok™ chuck and a heavy duty detachable cord and you have unchallenged value.

Built to handle industrial and construction applications with ease. The 3/8 in Magnum® drill with keyless chuck has the raw power of a Milwaukee® built motor to perform in forward and reverse on wood, metal, plastics and composites. The keyless chuck makes accessory changes fast and convenient, while the exclusive brush system speeds brush changes to under 1 min.

Perform at higher speeds. The 3/8 in Magnum® drill with all metal chuck makes drilling, surface finishing and other maintenance tasks go quickly with its extra speed. The drill's powerful motor delivers upto 2500 rpm the all metal gear case and diaphragm provide high durability on the jobsite while the Grip-Lok™ chuck adds convenience and extra grip strength. The ergonomic, tactile grip and two finger trigger optimize user comfort and balance.

Work more efficiently with the most versatile right angle drill/driver on the market. With a head size of just 3-3/4 in., this M12TM right angle drill/driver is compact and lightweight for drilling and fastening in tight spaces, yet delivers 100 in-lbs of torque. It's the first subcompact with a spindle lock chuck for maximum versatility and grip. It also features the industry's first electronic clutch, with 12 torque settings and an LED indicator for fastening with complete control. The M12 REDLITHIUM™ battery pack delivers more work per charge and more work over pack life than the competitors. The inboard fuel gauge helps you monitor the charge precisely, so there's less downtime on the job, and a built-in LED light illuminates the work surface. An extended paddle switch gives you ultimate comfort and convenience during prolonged use. The kit includes an M12 REDLITHIUM battery, 30-minute charger and carrying case.

3/8" CORDLESS DRILL-MAK02181>

The M18™ cordless 3/8 in. Compact Impact Wrench is the most powerful 3/8 in. Compact Impact Wrench in its class and offers the best power to size ratio among like competitors. Featuring a Milwaukee® built 4-pole frameless motor and optimized impact mechanism, this impact driver delivers up to 2,450 RPM, 3,350 ipm and 167 ft-lbs of fastening torque for class-leading performance. REDLINK™ Intelligence provides optimized performance and overload protection using total system communication between tool, battery and charger. The M18™ cordless 3/8 in. Compact Impact Wrench features a 3/8 in. friction ring anvil for fast, tool-free socket changes, an LED light to illuminate work surfaces, and includes an all-metal, reversible belt clip for temporary tool storage.

The 0370-20 close quarters angle drill provides a unique chuck angle for reaching into tight areas. Its large paddle trigger and textured grip area provides comfort and control in all positions. The angled cord exit keeps the cord out of the work area. The convenient forward/reverse lever is easy to use in close quarters.

3/8" H/D VSR ELECTRIC DRILL-MWK02241>

Milwaukee® 3-flat Secure-Grip™ hammer drill bits drill faster and last longer than others on the market. The 3-flat Secure-Grip™ shank fits in all 1/2 in 3-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications, the bit provides superior performance through its reinforced flute geometry and carbide tip design. Milwaukee® offers a complete range of 3-flat Secure-Grip™ hammer drill Bits in diameters from 1/8 to 1 in with lengths upto 18 in.

The 49-80-0305 air reduction nozzle can be used with Milwaukee heat guns 8978-20, 8986-20, and 8988-20 for applications where intensified, spot directed heat is needed for corners, bending Plexiglas or soldering. Includes nozzle only.

The 49-80-0307 air reflector nozzle can be used with Milwaukee heat guns 8978-20, 8986-20, and 8988-20 for applications such as small diameter tubing, wires, or shrink wrap tubing. Includes nozzle only.

Extend the life of your Milwaukee® Selfeed drill bits with the single ended feed screw. The aggressive feed screw thread design allows the bit to be pulled through the wood faster, resulting in faster drilling. The 3/8 in. regular thread replacement screw is designed for Selfeed bits 3 in. in diameter and larger. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.

Replacement collet for previous Milwaukee router models 5610, 5620, 5650, 5660, 5670, 5680, 5681 and 5682 to secure 3/8 in. shank router bits for precision routing.

Get maximum versatility in this 3/8 in workhorse drill. The 3/8 in Magnum® drill features a powerful motor for optimal speed and torque for hole saws, twist bits and light fastening jobs. The all metal gear case and diaphragm provide high durability on the jobsite the ergonomic, tactile grip and two finger trigger optimize user comfort and balance.

The MILWAUKEE® 3/8" x 54" Flexible Cable Auger Bit provides flexible drilling and clean holes when installing small wire systems in unreachable spaces. The screw tip design allows for faster wood boring. The dual pull-through hole design features holes on both ends for feeding wire through drilled holes. The auger style flute allows for faster drilling and easy chip ejection. The flexible shaft allows you to drill inside walls or between floors with greater precision and ease when installing all types of small wire systems, including computer, security, phone, and cable. The 3-FLAT SECURE-GRIP™ prevents the auger bit from slipping in the chuck. The reusable case protects the bit. The cable auger bit is for use with drills. Cable bit accessories sold separately.

Milwaukee® 49-56-7010 Arbor & Pilot Drill, 3/8 in Shank

A tough and durable resin fibber sanding disc for the metal working industry. A versatile, all purpose disc of exceptional value because of its ability to perform in a wide range of applications. Ideal for rust and scale removal as well as light general purpose grinding.