Milwaukee Tool

The MILWAUKEE® M12 FUEL™ 1/4 in. High Speed Ratchet is part of the latest addition to Milwaukee's best-in-class lineup of ratchets. This cordless ratchet provides the fastest speed while installing and removing fasteners. The most compact head size in its class offers more access in tight spaces. A steel yoke housing and POWERSTATE™ Brushless Motor deliver the superior durability expected from Milwaukee. The M12 FUEL™ High Speed Ratchets are an ideal addition to any technician tool chest, allowing professionals to be more productive than any other battery-powered ratchet.

The MILWAUKEE® M12 FUEL™ 3/8 in. High Speed Ratchet is part of the latest addition to Milwaukee's best-in-class lineup of ratchets. This cordless ratchet provides the fastest speed while installing and removing fasteners. The most compact head size in its class offers more access in tight spaces. A steel yoke housing and POWERSTATE™ Brushless Motor deliver the superior durability expected from Milwaukee. The M12 FUEL™ High Speed Ratchets are an ideal addition to any technician tool chest, allowing professionals to be more productive than any other battery-powered ratchet.

12-VOLT COMPACT, LIGHTWEIGHT LUBE GUN-MWK244621XC >

The 2497 - 22 M12 cordless 2-tool Combo kit includes the M12 3/8 in. Hammer drill/driver and the M12 1/4 in. Hex impact driver (2450-20). The innovative M12 cordless system is designed to deliver the power and torque required for professional applications, in a size that reaches the tightest and toughest places. Powered by Red Lithium, the M12 cordless system offers unmatched power, speed, and tool belt portability. Each tool in the Milwaukee 2497-22 kit has a built-in power gauge that indicates the remaining charge in its lithium-ion battery, which charges in as little as 30 minutes on the included charger. These tools also come with a carrying case for added convenience. Cordless tools powered by Red Lithium batteries deliver more torque, more power, and longer run-time than the competition.

At only 10-1/2 in and 3.5 lb, the M12™ cordless Lithium-Ion radio is upto 10 times smaller than existing job site radios. With the introduction of the first digital processor in the category, it also delivers the highest reception and signal clarity in the industry. In addition, the M12™ cordless Lithium-Ion Radio features premium weatherproof aluminum speakers that produce a rich, full sound and a built in weather sealed MP3 compartment to protect MP3 players and other audio devices connected to the docking portal. Backed by legendary Milwaukee® durability, a shock absorbing ABS polymer and steel construction protects internal components from weather and abusive job site conditions.

This compact, portable and powerful cutoff solution for the professional offers upto 10X longer life and 10% more speed. Get the power of a corded rotary tool in the M12™ cordless rotary tool, which integrates high performance motor design, optimized electronics and REDLITHIUM™ battery technology for exceptional power and durability. This compact, versatile tool offers a variable speed of 5000-32000 rpm and a collet that's compatible with all 1/32 to 1/8 in shank accessories for thousands of cutting, grinding, sanding and polishing solutions. Maintenance contractors, electricians, plumbers and automotive mechanics will find it indispensable for close quarter cutoff and grinding applications. A variable speed dial offers fluid control and the 1.3 pound weight permits hours of comfortable use. Grinder style exhaust ports and front bearing protection help this tool exceed performance and endurance expectations.

Make challenging cuts in dense materials Easily with the Milwaukee® 12 in carbide grit rod saw. These blades are made from tungsten carbide for durability and long life. Designed to cut in any direction, they can scroll cut cast iron, ceramic tile, fiberglass, slate, brick and marble.

Drop forged of high grade steel, this hammer iron with heat treated work areas is used for removing old mortar, tuck pointing, caulking and seaming. One per package.

Power and torque, that's about all that needs to be said about the hole-haw line of drills. The compact design of this drill makes it perfect for drilling between studs and joists. This unit will handle up to a 4-5/8 in. Selfeed bit. An extra long pipe handle helps you control the power. Features two speed ranges, 1200 and 300 RPM, this will greatly increase the versatility of this drill. Hi-torque and hi-speed make this the perfect choice for the heavy duty user. Powerful 7.5 amp motor. Powerful, yet compact for large hole drilling between joists and studs.

Delivers 300 ft-lb of torque for faster installations. The 1/2 in VSR impact wrench with detent pin socket retention is designed to maximize your productivity. Its powerful 7 A motor drives a unique impact mechanism that produces high torque and 1800 rpm for installing or loosening bolts in less time it features a detent pin to securely retain sockets or adapters and a variable speed reversing switch for added control in drilling applications or driving lag-bolts. The ergonomically shaped handle has a soft cushioned grip and provides a well balanced and controllable feel to this lightweight tool.

The 6470-21, 10-1/4 in. circular saw is built with the power and capacity to handle the most extreme cutting applications. The powerful 15 amp, 5,200 RPM motor delivers maximum power for high performance cutting without bogging down under load. An aircraft aluminum shoe will not bend or warp in extreme cutting applications. The electric brake increases productivity by stopping the blade in seconds. These heavy duty features combined with the 3-13/16 in. depth of cut capacity and 60° bevel capacity make the 6470-21 the most popular 10-1/4 in. circular saw in the industry.

The (6509-31) SAWZALL® Reciprocating Saw delivers best in class cut speed, durability and power with 0-3,000 strokes per minute, a 3/4 in. stroke length and a 12 amp motor. The gear protecting clutch extends gear and motor life by absorbing high impact forces and a QUIK-LOK™ blade clamp offers fast tool-free blade changes. To provide greater user comfort, a counter weighted mechanism reduces vibration for smoother operation and a redesigned front grip area provides best in class ergonomics.

14" ELECTRIC/CHOPSAWS/CUTOFF SAWS-MWK618020 >

Perform a variety of digging and drilling jobs on floors or the ground with this heavy duty INLINE™ design. The 2 in spline drive rotary hammer delivers 19.9 ft-lb of blow energy for drilling large holes in concrete or asphalt, bushing, driving ground rods, scraping floors, digging and tamping. The INLINE™ design offers more comfortable operation and the soft-grip side-handle can be attached in three positions - including the rear switch handle - to minimize bending. A system of anti-vibration absorption and reduction components decreases operator fatigue. Sophisticated electronic feedback offers consistent operation and overload protection. This robust electric hammer features a variable speed dial for optimum control and a service reminder light the tool uses standard spline and round/hex accessories and comes with a carrying case.

The 6140-30 4-1/2 in. 7.5 amp small angle grinder delivers performance, durability and ease-of-use features for industrial users. The X-large paddle switch with lock-on provides increased comfort and ease-of use when operating the grinder in various positions. Milwaukee's built in advanced airflow system, including debris baffles and multi-port exhaust, extends tool life. 25% longer lasting epoxy motor protection extends tool life by protecting the copper wires from abrasion. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool.

The 11 amp 4-1/2 in. small angle grinder (Slide, lock-on) delivers up to 3X more durability and up to 50% more power than the competition. With a 1,400 MWO motor that powers through the toughest jobs, the 6146-33 is the perfect match for industrial users. Milwaukee's electronic advantage includes overload protection to maximize motor life, an electronic clutch that extends tool life and helps prevent bind-up, line lock-out that prevents automatic start-up after power loss, and soft start. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. in addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.

The 13 amp 6 in. Small angle grinder (Slide, lock-on) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, the 6161-33 is the perfect match for industrial users. Milwaukee's electronic advantage includes overload protection to maximize motor life, an electronic clutch that extends tool life and helps prevent bind-up, line lock-out that prevents automatic start-up after power loss, and soft start. Constant power technology® enables the grinder to maintain speed under load for unmatched performance and productivity. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. in addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.

The 13 amp 6 in. Small angle grinder (Paddle, lock-on) delivers up to 30% more durability and power than the competition. With a 2,100 MWO motor that powers through the toughest jobs, the 6161-30 is the perfect match for industrial users. Milwaukee's electronic advantage includes overload protection to maximize motor life, an electronic clutch that extends tool life and helps prevent bind-up, line lock-out that prevents automatic start-up after power loss, and soft start. Constant power technology® enables the grinder to maintain speed under load for unmatched performance and productivity. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. in addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.

This compact specialty drill packs big power. The 1/2 in compact drill has the power and versatility to handle large hole drilling and material mixing applications. Its 650 rpm operating speed optimizes productivity in general purpose use. Built for two-handed operation, the drill features extra long handles for added leverage and control. You'll get quiet performance from the heat treated, helical cut gears.

This 15 A, 6000 rpm, 3.5 maximum horsepower sander provides high performance under severe applications. As a sander, this tool can be used with a 7 or 9 in backing pad for removing paint or rust from metal, plastic or fiberglass surfaces. Spiral bevel gears transfer maximum torque for heavy duty jobs. Spring loaded recessed spindle lock assists in easy accessory changes. Sold as a sander, this tool can be converted to a grinder by purchasing a 7 or a 9 in guard which is easily attached to the tool. Grinding applications remove more material and may be used to shape metal.

The 6088-31 7 Ft./ 9 in. 15.0 amp large angle grinder (Non lock-on) delivers performance and durability for the most difficult grinding jobs. The 15 amp, 4.2 HP motor provides high overload protection and power for the toughest jobs. The tool-free burst resistant guard allows the user to quickly adjust the guard without the use of a tool. Both a 7 in. and 9 in. type 27 grinding guard are included for greater productivity.

This compact specialty drill packs big power. The 1/2 in compact drill has the power and versatility to handle large hole drilling and material mixing applications. Its 900 rpm operating speed optimizes productivity on smaller-bit and medium-torque jobs. Built for two-handed operation, the drill features extra long handles for added leverage and control. You'll get quiet performance from the heat treated, helical cut gears.

This model features a Quik-Lok® cord, pin-detent system to securely retain sockets or adapters and a variable speed reversing switch for added control in drilling applications or driving lag-bolts. Delivering 300 ft. lbs of torque and weighing only 6 Lb., this tool has a great power to weight ratio. The powerful 7.0 amp motor drives a unique impact mechanism at 1800 RPM (no load). The ergonomically shaped handle with a soft cushioned grip provides a well-balanced and controllable feel to the tool. The special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time.

The 11 amp 4-1/2 in. small angle grinder (Trigger grip, lock-on) delivers up to 3X more durability and up to 50% more power than the competition. With a 1,400 MWO motor that powers through the toughest jobs, the 6121-30 is the perfect match for industrial users. Milwaukee's electronic advantage includes overload protection to maximize motor life, an electronic clutch that extends tool life and helps prevent bind-up, line lock-out that prevents automatic start-up after power loss, and soft start. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. in addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.