Milwaukee Tool

This replacement 1/4 in. chuck comes as standard equipment with the 6540-1 2.4 Volt single speed cordless screwdriver as well as 2-speed models (6547-1 and 6547-22). This chuck allows the same flexibility in drilling and driving capabilities as a driver drill or corded drill with a three jawed chuck. Includes chuck key.

The M18™ FUEL™ 1/4 in. Impact driver with ONE-KEY™ is the fastest, most compact, and most powerful tool in its class. The POWERSTATE™ brushless motor produces up to 2,000in-lbs of torque, delivering up to 30% faster driving speed, increasing productivity for the most demanding fasteners on the job. At only 4.59 in. in length, this is the most compact impact driver in its class, allowing better access in tight spaces. REDLINK Plus™ intelligence ensures maximum performance while protecting from overloads, heating and over-discharge. The M18™ REDLITHIUM™ battery packs (not included) deliver more work per charge and more work over the life of the packs than competitors. With ONE-KEY™, users gain the ability to customize, track and manage their tool. Save up to 4 task settings directly to the tool. Self-tapping screw mode provides faster installation time, shutting the tool down as soon as the fastener is seated to reduce damage to fasteners and materials. Using the tool's tracking functionality, if ever lost or stolen, lock it out to protect your investment.

Milwaukee® 49-56-8002 Pilot Drill, 1/4 in Drill - Fraction, 1/4 in Drill - Decimal Inch, HSS

Milwaukee® 3-flat Secure-Grip™ hammer drill bits drill faster and last longer than others on the market. The 3-flat Secure-Grip™ shank fits in all 1/2 in 3-jaw hammer drill chucks and maintains unyielding bit hold with heavy torsional loads. Designed especially for conical anchor, concrete screw, nail-in and hollow wall anchor applications, the bit provides superior performance through its reinforced flute geometry and carbide tip design. Milwaukee® offers a complete range of 3-flat Secure-Grip™ hammer drill Bits in diameters from 1/8 to 1 in with lengths upto 18 in.

7/8" SINGLE HOLE STEP DRILLBIT/UNIBIT - MWK48899115>

Milwaukee® 06-82-3060 Taptite Fillister/Pan Head Screw, For Use With 6232-51 Serial 678F 120 mm Deep Cut 2-Speed Band Saw, 1/4-20 x 1-5/16 in, T-30

Milwaukee® 06-75-3150 Left Hand Thread Socket Head Screw, For Use With 1007-1 Serial 628E, 1250-1 Serial 459D 1/2 in Reversing Drill and Keyed Chuck, 1/4-20 x 1 in

HAMMERDRILL DRILLBIT-MWK48206811 >

1/4" -7/8" -1-1/8" STEP DRILLBIT - MWK48899135 >

The M18™ FUEL™ 1/4 in hex impact driver is the most powerful tool in its class. At 1800 in-lb of fastening torque, this tool drives screws faster but also provides greater control Over power and speed thanks to its proprietary 4-mode DRIVE CONTROL™. The POWERSTATE™ brushless motor delivers up to 0 to 3000 rpm with constant power output to drive screws faster. REDLINK™ Plus™ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with REDLITHIUM™ compact batteries or extended capacity batteries (sold separately), which deliver more work per charge and more work Over the life of the pack than competitive batteries on the market. The 4-mode DRIVE CONTROL™ provides greater control Over output speed and power for greater versatility by delivering 0 to 850 rpm in mode 1 0 to 2100 rpm in mode 2 and 0 to 3000 rpm in mode 3. Self-tapping screw mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.

Milwaukee® 49-56-6960 Hole Saw Arbor, For Use With 9/16 to 1-3/16 in Dia Hole Saws

1/4" X 4" A-TAPER ROTARY HAMMER BIT--DISC-MWK48203250 >

1/8" - 1/2" STEP DRILLBIT/UNIBIT - MWK48899100>

Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.

Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.

The Milwaukee 10-1000V dual range voltage detector is the first non-contact voltage detector with the ability to light up, detect, and differentiate automatically. The expanded sensitivity range of 10-49V offers the ability to detect voltage in common systems that would normally go undetected when using a standard voltage detector. These systems include: LED lighting, fire detection & suppression systems, HVAC controls, and security & access controls, along with many others. The 10-1000V dual range voltage detector not only detects, but also differentiates 10-49V from the standard voltage range of 50 to 1000 V. it does so by using a uniquely colored LED indicators and audible tones, delivering the clearest indication of these two voltage ranges. A built-in LED work light allows for increased visibility in low-lit areas, and automatic shut-off after 5 minutes helps preserve battery life. The 10-1000V dual range voltage detector is a best-in-class voltage detection solution for any electrician, HVAC technician, or facilities maintenance technician.

10-24X1/2" PAN TORX SCREW -MWK06828864 >

A powerful mess needs a powerful vacuum cleaner. The Milwaukee® line of wet/dry vacuum cleaners offer power to spare. All wet/dry vac's have a positive water shut-off to protect the motor during wet pick-up situations. Heavy duty filters can handle large pieces of material as well as dust. Model 8965 offers a 14 in steel tank, a durable poly (polypropylene) head with a 6.2 A single-stage bypass motor and heavy duty casters.

A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A 1.65 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6880 is our heaviest nibbler with 10 gauge capacity in steel and 12 gauge into stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.

This item is the replacement die for Milwaukee's 10 gauge nibbler model 6880. The replacement punch, 48-44-0265, is purchased separately. Must be used with allen wrench 49-96-0350 to remove the punch or die.

This item is the replacement punch for Milwaukee's 10 gauge nibbler model 6880.

10 X 26 X 8 BALL BEARING-MWK02041005>

Milwaukee® Hole Dozer™ hole saw features Rip Guard™, the strongest tooth form in the industry, backed by the Rip Guard™ limited lifetime tooth break warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard™ warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the job site as well as continued hole quality. The Hole Dozer™ includes Plug Jack™, an all access slot design that allows for full access during plug removal. The Plug Jack™ gives access lower into the cup for thick material and higher towards the teeth for thin material. With multiple positions to apply leverage and better plug access, Plug Jack™ increases productivity and eliminates wasted downtime between holes. For fast, tool-free change outs, use Milwaukee® universal quick-change arbors. 49-56-7210, 49-56-7240, 49-56-7250 and 49-56-9100.

Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for longer periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Specially engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again.