Milwaukee Tool
Milwaukee® 48-62-2055 Scaling Chisel, 3/4 in, 21/32 in Hex/Round/Spline Shank, 3 in W Blade, 12 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Scaling chisels are ideal of cleaning concrete and removing scale and rust. Additionally, scaling chisels can be used for cutting troughs and some asphalt. The widened tip design allows for faster surface material removal. This chisel is specifically designed for Spline rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-2060 Slotting Chisel, 3/4 in, 21/32 in Hex/Round/Spline Shank, 1-1/2 in W Blade, 12 in OAL
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for slotting concrete, enlarging openings and web breaking between pre-drilled holes for demolition. One per package.
Milwaukee® 48-62-2070 Bushing Tool, For Use With 5345-21 Rotary Hammer, 1-3/4 in W Head, 9-3/4 in OAL, 3/4 in Hex, 21/32 in Round Shank
Removes excess concrete, produces exterior finish, roughens surface before surface coating.
Milwaukee® 48-62-2080 Seam Tool, For Use With 5345-21 Rotary Hammer and Spline/Round Hex Hammer, 1 in W Head, 12 in OAL, 3/4 in Hex, 21/32 in Round Shank
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for removing old mortar, tuck pointing, caulking and seaming. One per package.
Milwaukee® 48-62-2095 Clay Spade, For Use With 5345-21 Rotary Hammer and Spline/Round Hex Hammer, 4-1/2 in W Head, 16-3/4 in OAL, 3/4 in Hex, 21/32 in Round Shank
Drop forged hammer iron with heat treated work areas used for digging in clay and hard dirt. One per package.
Milwaukee® 48-62-3000 Bull Point Chisel, 3/4 in Hex Shank, 12 in OAL
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. One per package.
Milwaukee® 48-62-3005 Bull Point Chisel, 3/4 in Hex Shank, 18 in OAL
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. One per package. Features: bull point. 3/4 in. hex shank. 18 in. overall length. Made from forged high grade steel.
Milwaukee® 48-62-3010 Flat Chisel, 3/4 in Hex Shank, 1 in W Blade, 12 in OAL
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee® 48-62-3015 Flat Chisel, 3/4 in Hex Shank, 1 in W Blade, 18 in OAL
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee® 48-62-3030 Scaling Chisel, 3/4 in Hex Shank, 3 in W Blade, 12 in OAL
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for removing weld spatter, scale and concrete form overflow and seepage. One per package.
Milwaukee® 48-62-3070 Ground Rod Driver, For Use With 5337-21 Demolition Hammer, 9-3/4 in OAL, 3/4 in Hex, 2-3/4 in D Socket, 0.906 in ID, 5/8 x 3/4 in Dia Rod
Milwaukee Tool is an industry leading manufacturer of professional, heavy duty power tools and accessories. Milwaukee Tool has a full line of demolition steel accessories with a variety of shanks (SDS Plus, SDS Max, spline or round hex, 3/4 hex, and 1-1/8 C. The Milwaukee 48-62-3070 is a 9-3/4 in. x 3/4 in. Hex ground rod.
Milwaukee® 48-62-3085 Bushing Tool, For Use With 5337-21 Demolition Hammer, 1-3/4 in W Head, 9-3/4 in OAL, 3/4 in Hex Shank
Removes excess concrete, produces exterior finish, roughens surface before surface coating.
Milwaukee® 48-62-3090 Asphalt Cutter, For Use With 5337-21 Demolition Hammer, 5 in W Head, 16-1/2 in OAL, 3/4 in Hex Shank
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cutting asphalt or hard ground (do not use for concrete). This chisel is specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4000 Moil Point, For Use With Demolition Hammers, 20 in OAL, 1-1/8 in Collared Hex Shank with Notch
Drop forged of high grade steel, this hammer iron with heat treated work areas is used for demolition work and starting holes in the center of a concrete slab. Features: moil point. 1-1/8 in. collared hex shank with notch. 20 in. overall length. Made from forged high grade steel.
Milwaukee® 48-62-4005 Narrow Chisel, 1-1/8 in Hex Shank, 20-1/2 in OAL
Drop forged of high grade steel, this hammer iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package.
Milwaukee® 48-62-4010 Chisel, For Use With Demolition Hammers, 3 in W Head, 20-1/2 in OAL, 1-1/8 in Collared Hex Shank with Notch
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cleaning concrete, scale, rust, cutting troughs and some asphalt. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4020 Asphalt Cutter, For Use With Demolition Hammers, 5 in W Head, 17-1/2 in OAL, 1-1/8 in Collared Hex Shank with Notch
Drop forged wide blade chisel used to cut up and remove old asphalt sidewalk. One per package. Features: asphalt cutter. 1-1/8 in. collared hex shank with notch. 5 in. width x 17-1/2 in. overall length. Made from forged high grade steel.
Milwaukee® 48-62-4030 Clay Spade, For Use With Demolition Hammers, 5-1/2 in W Head, 20 in OAL, 1-1/8 in Collared Hex Shank with Notch
Drop forged hammer iron with heat treated work areas used for digging in clay and hard dirt. One per package.
Milwaukee® 48-62-4045 Ground Rod Driver, For Use With Demolition Hammers, 3 in W Head, 15-1/2 in OAL, 1-1/8 in Collared Hex Shank with Notch, 3 in D Socket, 0.906 in ID, 5/8 in and 3/4 in Dia Rod, 1 in Hole
Drives soft ground rods. Socket depth - 3 in., inner diameter - .906. rod diameter 5/8 in. and 3/4 in., length 15-1/2 in.
Milwaukee® 48-62-4065 Bushing Tool, For Use With SDS Max® 5315-21 Rotary Hammer, 1-3/4 in W Head, 10-1/2 in OAL, Slotted, 18 mm Round Shank
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Bushing tools are ideal for leveling concrete surfaces and removing excess concrete during finishing work. Additional, bushing tools can be used to roughen a smooth concrete to prepare the surface for additional concrete or a coating. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4066 Asphalt Cutter, For Use With SDS Max® 5315-21 Rotary Hammer, 5 in W Head, 16-1/2 in OAL, Slotted, 18 mm Round Shank
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for cutting asphalt or hard ground (do not use for concrete). This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4068 Clay Spade, For Use With SDS Max® 5315-21 Rotary Hammer, 4-1/2 in W Head, 16-5/8 in OAL, Slotted, 18 mm Round Shank
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for digging clay, hard packed gravel, dirt (do not use for concrete). This chisel is specifically designed for SDS Max® rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4073 Slotting Chisel, 18 mm SDS Max® Shank, 1-1/4 in W Blade, 15 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Break out the web between closely spaced drilled holes to make a large opening. This chisel is specifically designed for SDS Max® rotary hammers and should be used in hammer only mode.
Milwaukee® 48-62-4077 Bull Point Chisel, 18 mm SDS-Max Shank, 18 in OAL
Milwaukee® chisels are made from high grade, forged steel, providing up to 20% longer life. Designed for starting holes in concrete slabs, general chipping and breaking applications. This chisel is specifically designed for SDS Max rotary hammers and should be used in hammer only mode.
Recently Viewed
PIX BX-38 IS A COGGED, CLASSICAL V-BELT 41" OUTSIDE LENGTH, 21/32" TOP WIDTH, 13/32 IN THICKNESS
COGGED V-BELTS ALLOWS FOR SMALLER SHEAVE SIZES AND INCREASED POWER TRANSMISSSION CAPABILITIES. THE FIBER LOADED COGGED CONSTRUCTION PROVIDES OPTIMUM FLEXIBILITY AND MINIMIZES HEAT BUILD UP. PRECISION MOLDED RAW EDGE COGGED CONSTRUCTION TRANSFERS MORE POWER WITH MUCH GREATER EFFICIENCY. STABILITY IS ASSURED BY USING STOCK THAT MAINTAINS CORD INTEGRITY, ASSURING UNIFORM DISTRIBUTION OF LOAD TRANSMISSION.
-PIXBX38 >
1/2" -MALE PIPE THREADX1/8" -FEMALE PIPE THREAD GALVANIZED BUSHING-FIT1/2X1/8GB >
PIX BX-49 IS A COGGED, CLASSICAL V-BELT 52" OUTSIDE LENGTH, 21/32" TOP WIDTH, 13/32 IN THICKNESS
COGGED V-BELTS ALLOWS FOR SMALLER SHEAVE SIZES AND INCREASED POWER TRANSMISSSION CAPABILITIES. THE FIBER LOADED COGGED CONSTRUCTION PROVIDES OPTIMUM FLEXIBILITY AND MINIMIZES HEAT BUILD UP. PRECISION MOLDED RAW EDGE COGGED CONSTRUCTION TRANSFERS MORE POWER WITH MUCH GREATER EFFICIENCY. STABILITY IS ASSURED BY USING STOCK THAT MAINTAINS CORD INTEGRITY, ASSURING UNIFORM DISTRIBUTION OF LOAD TRANSMISSION.
-PIXBX49 >
5-MM-PITCH X 505-MM TIMING BELT - JAS5055M15>
14-MM-PITCH DOUBLE TIMING BELT-JASD210014M55 >
5-MM-PITCHX375-MM TIMING BELT-JAS3755M20 >
