Milwaukee® 48-20-5060 Heavy Duty Thin Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
-
BrandMilwaukee®
-
UPC045242105557
-
Manufacturer Part Number48-20-5060
-
CountryUSA|Canada
-
MaterialCarbide
-
TypeHeavy Duty
-
Applicable MaterialsBlock, Brick and Concrete
-
Cutting Depth2-13/16 in
-
Cutting Edge MaterialCarbide
-
Shank TypeSDS Max®/Spline
-
Drill Size - Decimal Inch5 in
-
Drill Size - Fraction5 in
- Usable cutting depth 3 in
- Thin-walled
- Use with SDS core bit shank 48-03-3555 (8 in) or 48-03-3561 (12 in)
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 22UR31 |
-
Alternative Part Number8576229
-
UNSPSC20121607
-
IDEA Index ID8576229
-
Package DescriptionEACH
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 48-20-5060 Heavy Duty Thin Wall Core Bit, 5 in Drill - Fraction, 5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6162 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
Klein® KHHTOPPAD2 Premium Replacement Top Pad, For Use With Hard Hat and Safety Helmet, Polyester
Klein® KARBN™ premium Top Pads work with Klein® hard hats and safety helmets. The Top Pad helps reduce pressure and prevents straps digging into the top of your head. They are made with advanced evaporative cooling material. Simply wet, shake away excess water for hours of cooling.
CORD AND CABLE CONNECTOR, 3/4" HUB 7/8" X 1-38, .625 - .750 CABLE RANGE-APLCG6275 >
CAL/SPREADERS-PEFW08111>
This IRWIN HANSON 536/526 Series 5-Piece Straight-Flute Screw Extractor Set is designed for softer materials or thin-walled pieces, such as pipes and fittings. The design on these screw extractors eases extraction because it does not expand the material as it is removed. Each IRWIN screw extractor can remove both left-hand and right-hand threaded parts and has the size and recommended drill bit size etched onto it.
Milwaukee® 3622-21 M12™ Automatic Cordless Self Leveling Cross Line and Plumb Points Laser, 125 ft Measuring, +/- 1/8 in at 33 ft Accuracy, 12 V, Li-Ion Battery, Reinforced Nylon Housing
The MILWAUKEE® M12™ Green Cross Line & Plumb Points Laser provides all day runtime and best visibility in its class. Get 15+ hours of continuous runtime using the M12™ REDLITHIUM™ 3.0 CP Battery for ultimate productivity. The high-intensity green laser offers superior visibility up to 125' for long-range applications. The vertical and horizontal lines make alignment and level applications easy, while the two plumb dots allow for quick transfers from floor to ceiling. The integrated magnetic bracket features micro-control and pivots on the plumb point for easy and fast alignment. The amplified rare earth magnets provide a strong hold and will not slide on steel studs, while an integrated hang hole makes setup easy and efficient in any environment. As part of the industry-leading M12™ System, this laser is compatible with all M12™ Batteries.
