Black+Decker® DC930KA Heavy Duty Cordless Drill/Driver Kit, 1/2 in Chuck, 14.4 VDC, 0 to 450/0 to 1450/0 to 1800 rpm No-Load
Black+Decker® DC930KA Heavy Duty Cordless Drill/Driver Kit, 1/2 in Chuck, 14.4 VDC, 0 to 450/0 to 1450/0 to 1800 rpm No-Load
-
BrandBlack+Decker®
-
UPC028877528595
-
Manufacturer Part NumberDC930KA
-
CountryUSA
-
Chuck Size1/2 in
-
Chuck TypeSingle Sleeve Axial Locking
-
TypeHeavy Duty
-
Voltage Rating14.4 V DC
-
No-Load Speed0 to 450/0 to 1450/0 to 1800 rpm
-
Bare Tool/KitKit
-
Battery IncludedYes
-
Number of Speeds3
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1GEC3 |
-
UNSPSC27112703
-
Includes(1) 1 hr Charger, (2) XRP™ 14.4 VDC Batteries and (1) Heavy Duty Kit Box
-
Package Description1/KIT
-
Instruction/Installation Manual
-
Full Engineering Drawing
Recently Viewed
Black+Decker® DC930KA Heavy Duty Cordless Drill/Driver Kit, 1/2 in Chuck, 14.4 VDC, 0 to 450/0 to 1450/0 to 1800 rpm No-Load
Black+Decker® DC930KA Heavy Duty Cordless Drill/Driver Kit, 1/2 in Chuck, 14.4 VDC, 0 to 450/0 to 1450/0 to 1800 rpm No-Load
Energizer® 389 Button Cell, Silver Oxide, 1.5 V DC Nominal, 85 mAh Nominal, 389
There are regular specialty batteries, and then there are Energizer Specialty Batteries. So get the durable, reliable power that keeps going with this Energizer 389 Silver Oxide Button Cell Battery. It delivers long-lasting power to your button-battery-operated devices, from household electronics like keyless entry systems, to e-books, toys, calculators, and watches, to heart rate and glucose monitors. And these zero-mercury coin batteries can hold power for up to five years in storage. Choose Energizer Specialty Batteries for long-lasting power you can count on when you need it.
Martin 40BS12 1 Bored-to-Size Type BS Single Pitch Roller Chain Sprocket With Keyway, 1 in Dia Bore, 2.166 in OD, #40 Chain, 12 Teeth, 1/2 in Pitch, Steel
These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.
Proto® J1432DB Dead Blow Hammer, 14 in OAL, 2-7/16 in Dia, 3 lb Rubber Head, Fiberglass Handle
Proto® J1432DB Dead Blow Hammer, 14 in OAL, 2-7/16 in Dia, 3 lb Rubber Head, Fiberglass Handle
Browning® 1297373 Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.28 in OD, 40-2 Chain, 19 Teeth, 1/2 in Pitch, Steel
Browning® 1297373 Idler Sprocket With Hardened Teeth, 1 in Dia Bore, 3.28 in OD, 40-2 Chain, 19 Teeth, 1/2 in Pitch, Steel
1550-9 3-blade Pocket Knife, Carbon Steel Spearpoint, Insulation-slitting, And Screwdriver
3-BLADE POCKET KNIFE, CARBON STEEL SPEARPOINT, INSULATION-SLITTING, AND SCREWDRIVER TIP BLADES-KLE15509 >
