Milwaukee® 48-20-4419 4-Cutter Rotary Hammer Drill Bit, 2 in Drill Bit, 3/4 in Spline Shank, 18 in D Cutting, Carbide Cutting Edge, 23 in OAL
Four cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters. 4 cutter style bits are also available in metric (from 16 mm to 38 mm). One per package.
-
BrandMilwaukee®
-
UPC045242103904
-
Manufacturer Part Number48-20-4419
-
CountryUSA|Canada
-
FinishUncoated
-
Point TypeCentering
-
MaterialHigh Carbon Steel
-
Flute Length18 in
-
ColorSilver
-
Type4-Cutter
-
Applicable MaterialsBlock, Brick, Concrete and Reinforced Concrete
-
Cutting Depth18 in
-
Shank Size3/4 in
-
Cutting DirectionRight Hand
-
Cutting Edge MaterialCarbide
-
Shank TypeSpline
-
Drill Bit Size2 in
-
Overall Length23 in
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 74216821 |
-
Alternative Part Number8575882
-
UNSPSC20111614
-
IDEA Index ID8575882
-
Package DescriptionEACH
-
Standards/ApprovalsANSI Specified|CSA Approved
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 48-20-4419 4-Cutter Rotary Hammer Drill Bit, 2 in Drill Bit, 3/4 in Spline Shank, 18 in D Cutting, Carbide Cutting Edge, 23 in OAL
Four cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters. 4 cutter style bits are also available in metric (from 16 mm to 38 mm). One per package.
Milwaukee® 48-20-4405 4-Cutter Rotary Hammer Drill Bit, 1-1/4 in Drill Bit, 3/4 in Spline Shank, 31 in D Cutting, Carbide Cutting Edge, 36 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Greenlee® Nail Eater® 37869 Extreme Impact Drill Bit, 3/4 in Dia, 18 in OAL, 12.9 in L Hollow Center Flute, 7/16 in Shank
Greenlee® Nail Eater® 37869 Extreme Impact Drill Bit, 3/4 in Dia, 18 in OAL, 12.9 in L Hollow Center Flute, 7/16 in Shank
ShearTap™ 35281 2090M Oversized Spiral Point Tap, Right Hand Cutting, M20x2.5 Thread, D7 Thread Limit, Plug Chamfer, 4 Flutes, Black Steam Oxide Over Nitride, HSS
ShearTap™ 35281 2090M Oversized Spiral Point Tap, Right Hand Cutting, M20x2.5 Thread, D7 Thread Limit, Plug Chamfer, 4 Flutes, Black Steam Oxide Over Nitride, HSS
Irwin® Speedbor® 88601 Heavy Duty Manual Locking Hex Key Extension, 1/4 in Shank, 12 in L, 1-1/16 in Dia Body
Double Set screw with Allen wrench. Recommended for all 1/4" Round shank drill bits requiring extra reach. Follows 5/8" And larger bits through hole. 1/4" Shank. Only fits round shank Speedbor or do it best brand bits.
Extend your reach a full 12 in. when drilling with Milwaukee Selfeed bits, auger bits and hole saws. The quick change shank is 7/16 in. hex. The 7/16 in. hex fits both 3 jawed chucks, 1/2 in. drill capacity and larger, as well as 7/16 in. quick change chucks.
