Mayhew Steel Products
Streamlight® 22010 USB Charger Kit, 2600 mAh Li-Ion Battery, 3-1/2 hr Single Bay, 3-1/2 hr Left Bay Priority, 6-1/2 hr Right Bay Charging, 2 Batteries
The 18650 Charger Kit comes with (2) Streamlight® 18650 USB batteries, one USB cord, and 2-bay charging cradle. These batteries can be recharged using the micro USB port in the battery (with a cord) or via the charging cradle.
Oatey® 23001 Silver Wire Solder, 420 to 460 deg F Melting, 1 lb, Alloy
Oatey® Silver Lead Free Plumbing Wire Solder is a silver bearing wire solder designed for plumbing and potable water line applications. Safe Flo Silver Lead Free Solder is also effective on brass alloys, chrome alloys, galvanized steel and cast iron piping. Oatey products have earned the trust of plumbing professional for over 100 years.
Mayhew™ 12202 Cold Chisel, 3/4 in, 12 in OAL, 3/4 in W Blade
Mayhew™ 12202 Cold Chisel, 3/4 in, 12 in OAL, 3/4 in W Blade
Mayhew™ 10302 Cold Chisel, 3/8 in, 7-3/4 in OAL, 3/8 in W Blade
Mayhew™ 10302 Cold Chisel, 3/8 in, 7-3/4 in OAL, 3/8 in W Blade
Mayhew™ 10202 Cold Chisel, 5/16 in Beveled Alloy Steel Tip, 5-1/2 in OAL, 5/16 in W Blade
Mayhew™ 10202 Cold Chisel, 5/16 in Beveled Alloy Steel Tip, 5-1/2 in OAL, 5/16 in W Blade
Mayhew PIN PUNCH 1/2" TIP 3/4 X 10" MAY 21401
Mayhew™ 21401 PRO™ Pin Punch, 1/2 in Hex Punch, 10 in OAL, Alloy Steel
Mayhew 7/8" X 7-1/2" COLD CHISELS MAY 10216
Mayhew™ 10216 PRO™ Full Finish Cold Chisel, Beveled Tip, 7-1/2 in OAL, 7/8 in W Blade
Mayhew 7/16" #11 #22KK76 PILOT PUNCHES MAY 25010
Mayhew™ 25010 Pilot Punch, 7/16 in Punch Round Punch, 6 in OAL, Steel
Mayhew 7"-28" S/STEEL INSPECTION MIRRORS MAY 17150
Mayhew™ 17150 Inspection Mirror, 2 x 3-3/4 in Mirror, Oblong Shape, 6-3/4 to 28-1/2 in L, Telescoping Handle
Mayhew 58"-L X 1-5/8"-TIP CURVED PRY BARS MAY 14120
Mayhew™ 14120 58-C Pry Bar, Curved Tip, 58 in OAL, Steel
Mayhew 5/8" X 6-1/2" COLD CHISELS MAY 10500
Mayhew™ 10500 Half Round Chisel, Cape, 1/8 in Tip, 5-1/2 in OAL
Mayhew 5/8" X 18" PNEUMATIC COLD CHISELS MAY 31986
Mayhew™ 31986 Pneumatic Chisel, Cold, 5/8 in Tip, 18 in OAL
Mayhew 5/8" X 16" LADYFOOT PRY BARS MAY 40152
Mayhew™ 40152 Lady Foot Round Body Pry Bar, Right Angle Chisel/Straight/Tapered Point Tip, 16 in OAL, Alloy Steel
Mayhew 5/8" BLACK OXIDE COLD CHISELS MAY 10209
Mayhew™ 10209 Cold Chisel, 5/8 in Beveled Alloy Steel Tip, 6-1/2 in OAL, 5/8 in W Blade
Mayhew 5/8" BLACK OXIDE CENTER PUNCHES MAY 24004
Mayhew™ 24004 PRO™ Center Punch, 3/8 in Tip, 6-1/4 in OAL, Steel Tip
Mayhew 5/32" BLACK OXIDE PIN PUNCHES MAY 21003
Mayhew™ 21003 PRO™ Pin Punch, 5/32 in Hex Punch, 5 in OAL, Alloy Steel
Mayhew 5/32" BLACK OXIDE LINE-UP PUNCHES MAY 22011
Mayhew™ 22011 PRO™ Reg Line-Up Punch, 5/32 in Hex Punch, 9 in OAL, Steel
Mayhew 5/16"-TIP BLACK-OXIDE CENTER PUNCH MAY 24001
Mayhew™ 24001 PRO™ Center Punch, 5/32 in Tip, 4-1/2 in OAL, Steel Tip
Mayhew 5/16" X 5" BLACK-OXIDE COLD CHISEL MAY 10201
Mayhew™ 10201 PRO™ Full Finish Cold Chisel, Beveled Tip, 5 in OAL, 5/16 in W Blade
Mayhew 5/16" BLACK OXIDE PIN PUNCHES MAY 21503
Mayhew™ 21503 PRO™ Extra Long Pin Punch, 5/16 in Hex Punch, 7-7/8 in OAL, Alloy Steel
Mayhew 5/16" BLACK OXIDE PIN PUNCHES MAY 21104
Mayhew™ 21104 Pro Pin Punch, 5/16 in Punch Hex Punch, 6 in OAL, Steel
Mayhew 5-PC CENTER PUNCH SETS MAY 62214
Mayhew™ 62214 Center Punch Kit, 5 Pieces
Mayhew 5-PC 8" PIN PUNCH SETS MAY 62065
Mayhew™ 62065 X-Long Pin Punch Kit, 5 Pieces
Mayhew 42"-L X 1-5/8"-TIP CURVED PRY BARS MAY 14118
Mayhew™ 14118 42-C Pry Bar, Curved Tip, 42 in OAL, Steel
Recently Viewed
4" X 8" 4-BOLT MOWER TAIL WHEEL-HERTW484 >
3-1/8" -IDX3-3/8" -OD O-RINGS
19" X 36" LOUVERED PANEL - AKR30636>
9-3/4" -IDX10" -OD O-RINGS
30-AMP 250-V AC RENEWABLE FUSES-LITRLN30>
Milwaukee® M12™ 48-20-7453 2-Cutter Rotary Hammer Drill Bit, 3/8 in Drill Bit, 25/64 in SDS-Plus Shank, 8 in D Cutting, Carbide Cutting Edge, 10 in OAL
Milwaukee® M/2™ 2-cutter SDS Plus rotary hammer drill bits are the most durable 2-cutter bits with up to 20% more holes per charge in cordless rotary hammers. The enhanced rebar guards provide increased durability in hard aggregate and rebar. Breaker point pulverize the material more effectively resulting in faster drilling speeds. The variable flute allows for maximum debris extraction leading to up 20% more holes per charge in cordless rotary hammer while making it a very durable bit in corded and cordless rotary hammers. Additionally, M/2™ 2-cutter features a centering tip for exact spot drilling, wear mark indicator indicating when the bit no longer meets ANSI diameter requirements, and a reinforced flute for durability and minimized vibration. The increased life and efficiency of the M/2™ 2-cutter drill bit line provides the ideal solution in general concrete for cordless and corded rotary hammer users.
