Mayhew™ 22011 PRO™ Reg Line-Up Punch, 5/32 in Hex Punch, 9 in OAL, Steel
Mayhew™ 22011 PRO™ Reg Line-Up Punch, 5/32 in Hex Punch, 9 in OAL, Steel
-
BrandMayhew™
-
UPC045256220116
-
Manufacturer Part Number22011
-
CountryUSA
-
MaterialSteel
-
Punch Size5/32 in
-
Punch TypeHex
-
TypeReg
-
SeriesPRO™
-
Overall Length9 in
- Used to align holes through which rivets, pins, or bolts will be inserted
- Not for use when driving pins, rivets or bolts
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KS50232 |
-
UNSPSC27111500
-
Package DescriptionEACH
-
Catalog
Recently Viewed
Mayhew™ 22011 PRO™ Reg Line-Up Punch, 5/32 in Hex Punch, 9 in OAL, Steel
Hougen® 12234 12000 Annular Cutter, 1-1/16 in Dia Cutter, 2 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Milwaukee® 49-57-0814 Tang Drive Annular Cutter, 13/16 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 13/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
#6X1-1/4" GALVANIZED DECK CAPSCREW-JWH707236 >
Crescent® PS6549C Pro Compound Action Long Nose Plier, Serrated Chrome Vanadium Steel Jaw, 1-9/16 in L x 1-9/32 in W Jaw, 9 in OAL
Increase your cutting power by 50% with the leverage-producing compound-action design of these Crescent Pro-Series 9-inch Long Nose Cutting Pliers. Made from chrome vanadium steel for increased durability, these pliers also have co-molded grips for added comfort and control.
Irwin® Hanson® 53405 534 EX-5 Spiral Flute Screw Extractor, #5 Extractor, 19/64 in Drill, For Screw Size: 3/8 to 5/8 in, 3/8 in NPT, 3/8 in BSP, 10 to 16 mm, 3-3/8 in OAL, 19/64 in Shank
IRWIN Spiral Flute Screw Extractors - 534/524 Series.
