Mayhew 5/16" BLACK OXIDE PIN PUNCHES MAY 21503
Mayhew™ 21503 PRO™ Extra Long Pin Punch, 5/16 in Hex Punch, 7-7/8 in OAL, Alloy Steel
-
BrandMayhew™
-
UPC045256215037
-
Manufacturer Part Number21503
-
CountryUSA
-
MaterialAlloy Steel
-
Punch Size5/16 in
-
Punch TypeHex
-
ColorBlack Oxide
-
TypeExtra Long
-
SeriesPRO™
-
Overall Length7-7/8 in
- Used to drive out and remove already loosened pins and keys after initial movement by a solid punch
- Not for use on seized pins and keys, loosen with a solid punch first
- Available in black oxide finish for additional rust protection
-
UNSPSC27111500
-
Package DescriptionEACH
-
Catalog
Recently Viewed
Mayhew™ 21503 PRO™ Extra Long Pin Punch, 5/16 in Hex Punch, 7-7/8 in OAL, Alloy Steel
1=1/2" FLANGE CARTRIDGE UNIT-FYHUCFCX0824E >
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Milwaukee® HOLE DOZER™ 49-56-0724 Hole Saw With Carbide Teeth, 2-1/4 in Dia, 1.62 in D Cutting, Carbide Cutting Edge, 5/8-18 Arbor
The MILWAUKEE® 2-1/4" HOLE DOZER™ with Carbide Teeth Hole Saw features a new 3 TPI design that offers fast cuts with the durability of a bi-metal hole saw and life of a carbide hole saw. This Milwaukee hole saw provides the longest life in general purpose and extreme materials with the ability to cut through stainless steel, cast iron, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles, and more with ease. Deep gullets clear material fast while cutting, and Milwaukee's ALL-ACCESS SLOTS solve the frustration of plug removal for more productivity with less downtime between holes. The new slot design also provides increased pilot visibility for accurate placement and faster chip ejection keeping cuts cool. The HOLE DOZER™ with Carbide Teeth Hole Saw has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Milwaukee HOLE DOZER™ with Carbide Teeth Hole Saws are proudly made in the USA.
V-BELTOUTSIDE CIRCUMFERENCE 54.4"-JAS1922V544 >
T-20 TORX SCREWDRIVER--CARDED -JWH340580 >
