Martin Sprocket & Gear

Martin 14-TOOTH #60-1 CHAIN SPROCKETS MAI 60-BS-14-F1-1/4

These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.

Martin 12-T SPROCKETS FOR #40 CHAIN MAI 40-BS-12-F-1

These finished bore sprockets are shaft ready and come complete with keyways and setscrews. The keyways are on center line of the tooth. Bored to size sprockets with 1/2 in bores and smaller are stocked with (2) setscrews only.

Martin 100E25 QD Bushed Type B1 Single Pitch Roller Chain Sprocket, 10.645 in OD, #100 Chain, 25 Teeth, 1-1/4 in Pitch, Steel

QD (quick detachable)is a sprocket where a tapered bushing is bolted into the taper bore that is machined in the sprocket. When installed this bushing is compressed onto the shaft providing a tight grip.

Martin 1-7/8"-ID QD SK-STYLE BUSHINGS MAI SK-1-7/8

QD (quick detachable) bushings are designed for conventional mounting or reverse mounting. These bushings have a flange.

Martin 1-7/8"-ID 2012-STYLE TL BUSHINGS MAI 2012 X 1-7/8

Martin 2012 1 7/8 Standard Taper Lock Bushing, 1-7/8 in Dia Bore, 2-3/4 in Dia Barrel, 1-1/4 in OAL, Steel

Martin 1-1/2" HANGER BEARING MAI CHB-2203-N

Nylatron bearings are used as support bearings for drive and screw conveyor shafts. This self-lubricating hanger bearing can withstand temperatures up to 250 deg F and is compatible with 220 and 19B style hangers. It is recommended for grain, feed and chemical handling applications due the very low load capacity attribute.

Martin #120-1 CHAIN 80-TOOTH SPROCKETS MAI 120-J-80

QD (quick detachable)is a sprocket where a tapered bushing is bolted into the taper bore that is machined in the sprocket. When installed this bushing is compressed onto the shaft providing a tight grip.

LoveJoy 1-7/8"-ID S-FLEX COUPLING HALF LOV 6-S-1-7/8

Martin Quadra-Flex® is a proven design which offers long life, torsional flexibility, ease of installation and withstands misalignment, shock and vibration. Available in sizes 3 to 16 in bored to size, QD bushed, spacer type and plain bore for custom requirements.

Browning 72-T XL-PITCH MPB T/BELT SHEAVES BRW 72-XL-B-037

Martin timing pulleys are manufactured to extremely close specifications and are stocked in minimum plain bore, taper bushed, QD bushed styles depending on size and pitch. Synchronous sprockets are non-slip toothed drives that require no lubrication. These sprockets have a wide speed range, are very efficient and make less noise than chain drives. Teeth on the belts are molded to conform with and engage the teeth on a mating sprocket.