L.S. Starrett

Starrett® GF1018 All Purpose Hand Hacksaw Blade, 1/2 in W x 10 in L Blade, High Carbon Steel Cutting Edge, High Carbon Steel Blade, 18 TPI

The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 9.5mm (3/8") Diameter.

The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 3mm (1/8") Diameter.

The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 3mm (1/8") Diameter.

Body Clamp (was 711-28, 29, 30).

The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 6mm (1/4") Diameter.

The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 330mm (13") Length, 6.4-12.7mm(1/4-1/2") Tap Size.

The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 90mm (3 1/2") Length, 6.4-12.7mm (1/4-1/2") Tap Size.

The Starrett 248 Drive Pin Punch is intended for machine shop and motor service work, extra long in size, measuring 200mm (8"), with 114mm (4-1/2") bodies and 89mm (3-1/2") drive pin section. 200mm (8") Length, 6mm (1/4") Diameter.

The Starrett 178 Series Fillet or Radius Inch Reading Gages are very useful for tool and diemakers, machinists, screw machine operators, patternmakers and other mechanics to lay out and check radii of tools, dies, patterns, and more. 30 Leaves, 1/32-1/4" Range, 64ths increments.

Starrett® AO12-12 791 Top Mount Measuring Tape, 12 ft L x 1/2 in W Blade, Imperial/Metric Measuring System, S1 Graduation

4ft, English (Left-to-Right) Measure Stix™ Adhesive Tape Measure. Manufactured with high quality precision steel. It is produced with a permanent adhesive backing providing convenient, at-a-glance measurements. Can be mounted on work benches, saw tables, drafting tables, and more. They can easily be cut to proper size with scissors. This item reads with a left to right print orientation.

Starrett® 65943 Tru-Lok® 1-Sided Industrial Quality Measuring Tape, 12 ft L x 1/2 in W Blade, Carbon Steel Blade, Imperial Measuring System, 1/16ths, 1/32nds, 1/2 in, 3/4 in Wide Blades Graduation

The Starrett English Thickness Gage is used in automotive, aviation, diesel and farm equipment manufacture and service and also in jig, fixture, gage and experimental work. These gages are Especially useful in adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins and gaging narrow slots. Made in a wide range of types and sizes, each having from 6 up to 26 leaves ranging in thickness from .0015-.200" and 0.03-5mm thick straight or tapered. 8 Tapered Leaves, 1/2-1/4 x 6", inch reading, .002-.015" Range.

The Starrett 565 Drive Pin Punch is well proportioned, hardened, properly tempered, nicely finished, and have a knurled finger grip. Each punch has the size stamped on the head. 100mm (4") length, 1.5mm (1/16") Diameter.

The Starrett 93 T-Handle Tap Wrench is for holding taps, drills, reamers and other small tools to be turned by hand. It is properly heat treated to withstand ordinary shop use. The jaw conforms to the tool being held, making it rigid and less apt to loosen. The wrench has a sliding handle that is frictionally held. This feature permits the handle to be removed entirely or positioned so that leverage can be applied when working in close quarters. 50mm (2") Length, 1.6-4.7mm (1/16-3/16") Tap Size.

The Starrett 117 Center Punch is made of specially selected steel, hardened and properly tempered. It is well proportioned, nicely finished and has a knurled finger grip. The points are ground at the proper angle to give maximum service, and the tips are accurately centered. 3" (75mm) Length, 1/16" (1.5mm) Point Diameter.

Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 1" with Insulated Handle.

Use of this cleaner keeps surface plates and other precision granite products in top condition. Regular cleaning helps prevent abrasion of tools by dirt and other foreign particles. The cleaner, which also acts as a degreaser and rust inhibitor, should be used without water to minimize the risk of rusting tools.

Starrett 436.1 Outside Mechanical Micrometers are the most popular precision micrometers used by skilled workmen worldwide. They are accurate, rugged, and easy to use. T436.1XRL-2 features a 1-2" range, .0001" graduations, and a flat, carbide anvil. The locknut is knurled ring type, with ratchet thimble. Produced with a black wrinkle frame finish. Furnished with a storage case. Standard Letter of Certification (SLC) is available as an optional add-on.

The Starrett T230XRL Outside Micrometer includes a ratchet stop, lock nut, carbide face, and 0-1" Range, .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut .

Starrett® 216XFL-1 Mechanical Digital Outside Micrometer, 0 to 1 in, Graduations: 0.001 in, Carbide Tip, Black Frame/Satin Chrome Thimble

The Starrett 207 & 208 Stainless Steel Can Seam Micrometer features 0-.375" range with a depth gage of .200" range. 0-.375" Range, .001" Grad, Depth Gage (.200" Range) in Case.

Starrett® T232RL Mechanical Outside Micrometer, 0 to 1/2 in, Graduations: 0.0001 in, Steel, Satin Chrome