Starrett® 666-5 Straight Leave Thickness Gage With Dispenser Case, 25 ft L x 1/2 in W x 0.005 in THK, Tempered Steel
Starrett 666 Series Thickness Gage or "Feeler" Stock in Rolls. This handy product includes thickness stock, housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gaging narrow slots, etc. This stock is also useful for shimming in fixturing and die work.
-
BrandStarrett®
-
UPC049659528022
-
Manufacturer Part Number666-5
-
CountryUSA|Canada
-
MaterialTempered Steel
-
TypeStraight Leave
-
Series666
-
Blade Length25 ft
-
Blade Thickness0.005 in
-
Blade Width1/2 in
- Marked every 6 in or 150mm with a line for easy, exact dispensing
- Handy 25 ft (7.6m rolls), 1/2 in (12.7mm) wide
- Compact, sturdy plastic rewindable dispenser case
- Case provides the ability to snip off the desired length without any waste
- Rewind feature permits retracting thinner feeler stock into the case, preventing damage
- Marked every 6 in or 150 mm with a line, thickness in thousandths of an inch or in hundredths of a mm
- Case provides the ability to snip off the desired length without any waste
- +/-0.0002 in accuracy
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 30C289 |
| MSC | 01563584 |
| Fastenal | 0324907 |
-
Alternative Part Number52802
-
UNSPSC41111623
-
Package DescriptionEACH
-
Specification Sheet
Recently Viewed
Starrett® 666-5 Straight Leave Thickness Gage With Dispenser Case, 25 ft L x 1/2 in W x 0.005 in THK, Tempered Steel
Starrett 666 Series Thickness Gage or "Feeler" Stock in Rolls. This handy product includes thickness stock, housed in convenient rewindable dispenser rolls. Having the thickness stock in a case makes it very useful for cutting off the required length for adjusting tappets, spark plugs, distributor points, checking bearing clearances and gear play, fitting pistons, rings and pins, gaging narrow slots, etc. This stock is also useful for shimming in fixturing and die work.
2" -OVERALL LENGTH COMPRESSION SPRINGS; MAXIMUM LOAD 51.47 LBS-AJA16 >
5/32 SOLID PUNCH 3/8" HEX - ALL25640 >
Anvil® 0318904083 Square Head Countersunk Pipe Plug, 3/8 in Nominal, MNPT End Style, 300 lb, Merchant Steel, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 300 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI. (6.9 bar).
5/16" LONG TAPER DRIFT PUNCH - ALL25635 >
A GALVANIZED HARD DRAWN COMPRESSION SPRING WITH AN OUTSIDE DIAMETER OF 0.312" AND AN OVERALL LENGTH OF 2.312".
-AJA24 >
