Fenner Drives
Fenner Drives® Eagle® 1032008 Non-Reinforced Solid Core Round Belt, 1/4 in Dia, Polyurethane, Orange
Eagle® orange 85 non-reinforced round belting is constructed of solid polyurethane with an 85 shore A durometer that provides excellent abrasion resistance, high elasticity and is also self-tensioning. Packaged in 100 ft/30.5 m L.
Fenner Drives® Eagle® 5700200 Butt Welding Kit
Fenner Drives® Eagle® 5700228 Hot Knife
Fenner Drives® PowerTwist Drive® 0405030 Ribbed Link Belt, A/13/4L Section, 1/2 in W Top, 25 ft L Outside, 1/2 in THK, Polyester/Polyurethane
Fenner Drives® PowerTwist Drive® 0405030 Ribbed Link Belt, A/13/4L Section, 1/2 in W Top, 25 ft L Outside, 1/2 in THK, Polyester/Polyurethane
Fenner Drives® PowerTwist Drive® 0405050 Ribbed Link Belt, B/17/5L Section, 5/8 in W Top, 25 ft L Outside, 5/8 in THK, Polyester/Polyurethane
Fenner Drives® PowerTwist Drive® 0405050 Ribbed Link Belt, B/17/5L Section, 5/8 in W Top, 25 ft L Outside, 5/8 in THK, Polyester/Polyurethane
Fenner Drives® Trantorque® 6202380 GT Series Collar Nut Keyless Bushing, 1-7/16 in Dia Bore, 2-3/8 in OD, 2-3/4 in OAL, Steel
From gears to cams, timing belt sprockets to conveyor rolls, climate control fan hubs to grinding wheels, the extensive range of Trantorque® keyless bushings - all with a single locking nut - offers easy to use options for mounting and adjusting position sensitive, zero backlash drive components and accessories.
Fenner Drives® Trantorque® 6202803UP GT Series Keyless Bushing, 16 mm Dia Bore, 38 mm OD, 38.1 mm OAL, Steel
The Trantorque® GT series 16 mm keyless bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 16 mm in diameter by means of a mechanical interference fit and transmits up to a maximum 209 N-m of torque.
Fenner Drives® Trantorque® TTQM1223 Mini Single Taper Keyless Bushing, 12 mm Dia Bore, 23 mm OD, 26 mm OAL, Steel
The Trantorque® mini series 12 mm keyless bushing provides a high capacity, zero-backlash shaft/hub or coupling connection of mounted components to shafts measuring 12 mm in Dia by means of a mounted mechanical interference fit and transmits up to 81 N-m of torque. Trantorque® mini series 12 mm keyless bushings provide a zero-backlash frictional connection that will never wear or pound out and can accommodate high-torque, thrust, bending and/or radial loads. This product has exceptional concentricity and the ability to accommodate bending loads. The Trantorque® mini series has limited axial movement during installation. All Trantorque® units use a single hex nut for speed and simplicity of installation.
Recently Viewed
HCI Preferred Supplier 28184 Reducer Coupling, 1/2 x 1/4 in Nominal, FNPT End Style, Brass
HCI Preferred Supplier 28184 Reducer Coupling, 1/2 x 1/4 in Nominal, FNPT End Style, Brass
RAZOR BLADE SCRAPERS (TE-05-607-P)-JPA3100>
Item Description: Inserted hammer face Material: Plastic Installation Type: Screw-in
AXLE SOCKETS-PEFW83178>
MAXCO Inspire Series™ 80 Riveted ASME/ANSI Standard Roller Chain, Single Strand, 10ft Box, 1″ Pitch
Klein® D2000-9NETP 2000 New England Nose Lineman's Plier, 1-19/32 in L x 1-1/4 in W x 5/8 in THK Jaw Tool Steel Jaw, Crosshatch Knurled Jaw Surface, 9.55 in OAL
These Lineman's Side-Cutting pliers feature a built-in channel to pull steel fish tapes without damaging the wire. Cutting knives are induction hardened for long life. The 2000 series blades are designed for heavy-duty cutting of ACSR, screws, nails, and most hardened wire. The high-leverage design provides 46-Percent greater cutting power than other plier designs. Exclusive handle tempering absorbs the snap when cutting wire. Pick up these Klein's and feel the difference.
