40120 IMPACT PRODUCTS
20-OZ LIE-FLAT RAYON SCREW MOPHEAD - IPT40120>
Recently Viewed
20-OZ LIE-FLAT RAYON SCREW MOPHEAD - IPT40120>
Drillco 76A108C 7600 Center Cutting Imperial Regular Length Single End Ball Nose End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Uncoated
Solid carbide end mills run at extremely impressive feed and speed rates. In some cases, they can be run at 3x the rates of HSS end mills. Using solid carbide end mills results in better surface finish on the workpiece and extended tool life. Ball nose.
1" DIAMETERX3" SOCKET HEAD CAP SCREWS-HOL72376 >
Romex® SIMpull® 28828272 Type NMB Cable, Spool Packaging, 600 V, (2) 12 AWG Copper Conductor, 400 ft L, Yellow
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
Rust-Oleum® 206043 AF1600 System Water Base Athletic Field Striping Paint, 17 oz Container, Liquid Form, White, 100 to 200 linear ft/gal with 3 in W Stripe Coverage
Rust-Oleum Industrial Choice Athletic Filed Striping Paint is used for marking concrete, pavement, gravel, grass and more. Ideal for marking the location of underground utilities at construction and excavation sites where identification is desired.
Dichtomatik 75115278 O-Ring, 267 Dash Number, 8.234 in ID x 8.512 in OD, PTFE, 55 Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
