Glasfloss® PTA20201 Disposable Panel Filter, 20 in W x 1 in D x 20 in H, MERV: 1 to 5, 180 deg F, Domestic
The Glasfloss PTA shall be constructed of a single piece of heavy-duty, one piece craftboard frame. The metal grid shall be thermally bonded internally to the frame. The metal grids shall provide an 82 percent open area. All corners shall be closed and sealed. The filter media shall be constructed in a progressively dense fashion from air entertaining to air-leaving side. Glasfloss disposable panel filters shall be rated to withstand temperatures up to 180 degrees Fahrenheit. All filters shall be classified under U.L. std. 900.
-
BrandGlasfloss®
-
UPC604443999190
-
Manufacturer Part NumberPTA20201
-
CountryUSA
-
Filter Rating3 to 10 micron
-
Temperature Rating180 deg F
-
Final Resistance1/2 in WG
-
MERV1 to 5
-
Flow Rate300 fpm
-
Frame MaterialKraft Board
-
Media MaterialPolyStrand®
-
Height20 in
-
Width20 in
-
SeriesPTA
-
Depth1 in
-
Initial Resistance0.09 in WG
-
Domestic/ImportDomestic
-
Efficiency<20%
-
Overall Dimensions19-5/8 in W x 3/4 in D x 19-5/8 in H
- Progressively dense heavy duty media
- Heavy duty one piece box frame construction
- Thermally bonded
- The glasfloss PTA series disposable panel filter has set the standard for quality and durability
- This rigidly constructed air filter maintains its integrity where others fall short
- Always the highest quality, glasfloss disposable panel filter have metals grids on both the air entry and air leaving sides
- Heavy duty media, heavy duty media, metals grids on both sides
-
UNSPSC40161519
-
Standards/ApprovalsANSI/ASHRAE 52.2|EnergyStar® Qualified|UL 900
-
Catalog
-
Specification Sheet
Recently Viewed
Glasfloss® PTA20201 Disposable Panel Filter, 20 in W x 1 in D x 20 in H, MERV: 1 to 5, 180 deg F, Domestic
The Glasfloss PTA shall be constructed of a single piece of heavy-duty, one piece craftboard frame. The metal grid shall be thermally bonded internally to the frame. The metal grids shall provide an 82 percent open area. All corners shall be closed and sealed. The filter media shall be constructed in a progressively dense fashion from air entertaining to air-leaving side. Glasfloss disposable panel filters shall be rated to withstand temperatures up to 180 degrees Fahrenheit. All filters shall be classified under U.L. std. 900.
5/16" DIAMETERX1-3/4" SOCKET HEAD CAP SCREWS-HOL72134 >
FHP V-BELT-JAS3L680 >
MORSE® 44206 4552 Center Cutting Extra Long Length Single End End Mill, 3/4 in Dia Cutter, 4 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 6-1/4 in OAL, Bright
Coilhose® PFE61004T Flexeel® PFE6 Straight Air Hose With Reusable Strain Relief, 3/8 in, 1/4 in MPT Rigid, 100 ft L, 200 psi at 70 deg F, Reinforced Polyurethane, Domestic
Flexeel® reinforced polyurethane is an extremely flexible coil with excellent memory, a small bend radius, and a tight coil diameter that reduces work and storage space. Flexeel® coil is the original reinforced polyurethane coil. This hose is extremely lightweight and is extruded with an inner-layer, a layer of reinforced braiding, and an outside jacket. This extrusion process yields an "integral piece" that ensures the integrity of the hose over long periods of use. All of this yields a strong, durable hose with an increased working pressure. These units are equipped with reusable fittings that allow in-field repairs if necessary. Flexeel® coils feature straight sections measuring 16" at the tool end, and 8" at the supply end, eliminating the need for an additional whip hose.
Powers™ TempTAP™ 115 Traditional Standard Lavatory Faucet, 1 Handles, 2 gpm Flow Rate
Series 105 and 115 TempTAP™ thermostatic faucets feature an advanced thermal actuator to provide the latest in thermal protection. The single-lever cartridge, with integral ceramic discs, provides both temperature and volume control. TempTAP™ automatically mixes hot and cold water to deliver pre-set water within a specific range. In the event of cold water failure, the thermal actuator virtually shuts off the flow of hot water. TempTAP™ is listed to ASSE 1070, IAPMO cUPC, and NSF 61 Section 9 Annex G.
