Coilhose® PFE61004T Flexeel® PFE6 Straight Air Hose With Reusable Strain Relief, 3/8 in, 1/4 in MPT Rigid, 100 ft L, 200 psi at 70 deg F, Reinforced Polyurethane, Domestic
Flexeel® reinforced polyurethane is an extremely flexible coil with excellent memory, a small bend radius, and a tight coil diameter that reduces work and storage space. Flexeel® coil is the original reinforced polyurethane coil. This hose is extremely lightweight and is extruded with an inner-layer, a layer of reinforced braiding, and an outside jacket. This extrusion process yields an "integral piece" that ensures the integrity of the hose over long periods of use. All of this yields a strong, durable hose with an increased working pressure. These units are equipped with reusable fittings that allow in-field repairs if necessary. Flexeel® coils feature straight sections measuring 16" at the tool end, and 8" at the supply end, eliminating the need for an additional whip hose.
-
BrandCoilhose®
-
UPC029292503259
-
Manufacturer Part NumberPFE61004T
-
CountryUSA
-
Temperature Rating-40 to 165 deg F
-
MaterialReinforced Polyurethane
-
ColorClear Blue
-
TypeStraight
-
Nominal Size3/8 in
-
SeriesFlexeel® PFE6
-
Working Pressure200 psi at 70 deg F
-
Domestic/ImportDomestic
-
Outside Diameter9/16 in
-
Length100 ft
-
End Style1/4 in MPT Rigid
- Offers an excellent alternative to much bulkier rubber hoses
- Constructed of lightweight, tough reinforced polyurethane
- Withstands constant flexing, even in subzero conditions
- Kink and abrasion resistant
- Much lighter than other comparably sized hoses
- Very small bend radius
- Resistant to chemicals, water, fuel, oil and fungus
- Non-marring to furniture and auto finishes
- High quality brass fittings provide strong and durable connection
- Ends are completely field repairable
- 28 in hg Vacuum rating
-
UNSPSC40142002
-
Package Description1/PK
-
Specification Sheet
-
Catalog
Recently Viewed
Coilhose® PFE61004T Flexeel® PFE6 Straight Air Hose With Reusable Strain Relief, 3/8 in, 1/4 in MPT Rigid, 100 ft L, 200 psi at 70 deg F, Reinforced Polyurethane, Domestic
Flexeel® reinforced polyurethane is an extremely flexible coil with excellent memory, a small bend radius, and a tight coil diameter that reduces work and storage space. Flexeel® coil is the original reinforced polyurethane coil. This hose is extremely lightweight and is extruded with an inner-layer, a layer of reinforced braiding, and an outside jacket. This extrusion process yields an "integral piece" that ensures the integrity of the hose over long periods of use. All of this yields a strong, durable hose with an increased working pressure. These units are equipped with reusable fittings that allow in-field repairs if necessary. Flexeel® coils feature straight sections measuring 16" at the tool end, and 8" at the supply end, eliminating the need for an additional whip hose.
Coilhose® YB41004Y Yellow Belly™ Straight Hybrid Hose, 1/4 in, 1/4 in MPT Rigid, 100 ft L, 300 psi, Hybrid PVC, Import
Coilhose® YB41004Y Yellow Belly™ Straight Hybrid Hose, 1/4 in, 1/4 in MPT Rigid, 100 ft L, 300 psi, Hybrid PVC, Import
Drillco 55A148D 5500A Center Cutting Double End Imperial Regular Length Finishing End Mill, 3/4 in Dia Cutter, 1-5/8 in Length of Cut, 4 Flutes, 3/4 in Dia Shank, 5-5/8 in OAL, Bright
The multi-flute end mill has a better finishing capability than a 2-flute end mill. At any given instance, at least one and often two of the teeth are solidly in the cut. The cutting action is smoother than that of the 2-flute end mill, with less chatter.
Drillco 695A120A 6950A Center Cutting Double End Imperial Regular Length Finishing End Mill, 5/16 in Dia Cutter, 3/4 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 695A108A 6950A Center Cutting Double End Imperial Regular Length Finishing End Mill, 1/8 in Dia Cutter, 3/8 in Length of Cut, 4 Flutes, 3/8 in Dia Shank, 3-1/16 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower.
Drillco 690A120A 6900A Center Cutting Double End Imperial Regular Length Finishing End Mill, 5/16 in Dia Cutter, 9/16 in Length of Cut, 2 Flutes, 3/8 in Dia Shank, 3-1/2 in OAL, Bright
The greater red hardness of M-42 Cobalt end mills enables these tools to run about 10% faster than conventional HSS end mills. This translates to shorter machining times and permits higher utilization of available machine horsepower. Double-ended.
