Joist Hangers
Simpson Strong-Tie® LUS28 Double-Shear Face-Mount Joist Hanger, 2 x 8 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS26 Double-Shear Face-Mount Joist Hanger, 2 x 6 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS24 Double-Shear Face-Mount Joist Hanger, 2 x 4 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LUS210 Double-Shear Face-Mount Joist Hanger, 2 x 10 in Joist, 18 ga, Steel, Galvanized
The double-shear hanger series, ranging from the light-capacity LUS hangers to the highest-capacity HGUS hangers, feature innovative double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection. For medium-load truss applications, the MUS offers a lower-cost alternative and easier installation than the HUS or THA hangers, while providing greater load capacity and bearing than the LUS.
Simpson Strong-Tie® LRU26Z Face-Mount Rafter Hanger, 2 x 6 in Joist, 18 ga, Steel, ZMAX® Galvanized
The LRUZ offers an economic alternative for those applications requiring a sloped hanger for rafter-to-ridge connections. Used with solid sawn rafters, the LRUZ's unique design enables the hanger to be installed either before or after the rafter is in place. The field-adjustable seat helps improve job efficiency by eliminating mismatched angles in the field and lead times associated with special orders. The LRUZ offers comparable or better load capacity to other rafter hangers at a reduced cost while using fewer fasteners.
Recently Viewed
1/2 -FEMALE PIPE THREADX3/8 -FEMALE PIPE THREAD BLACK REDUCER
Proto® TorquePlus™ J07517 Standard Length Socket, Imperial, 3/4 in Square Drive, 1-1/16 in
Milwaukee® 23-66-1705 Trigger Speed Control Reversing Switch, For Use With 0234-6 Serial 532D, 0244-1 1/2 in Magnum Hole Shooter, 0233-20 Serial 924C 3/8 in Keyless Magnum Hole Shooter
Greenlee® Slug-Buster® 00042P Replacement Draw Stud, Manual Driver, 3/8 in Dia x 1-5/8 in L, For Use With Slug-Buster® Knockout Punch
Greenlee® Slug-Buster® 00042P Replacement Draw Stud, Manual Driver, 3/8 in Dia x 1-5/8 in L, For Use With Slug-Buster® Knockout Punch
4/10 AMP 250V AC TIME DELAY FUSES-LITFLM4/10>
GEARWRENCH 3/8" drive sockets are manufactured from alloy steel for maximum durability and strength. Our off corner loading design reduces fastener rounding and the chamfered opening help guide the socket on to fasteners. Our sockets feature a double line (SAE) and knurled (metric) ring help easily identify standard and metric sockets.
