Proto Tools 1-1/16" 1/2"-DR CROWFOOT WRENCH PRO J-5334-CF
Proto® J5334CF Crowfoot Wrench, Imperial, 1-1/16 in Wrench, 1/2 in Drive, 2-7/8 in OAL, ASME B107.21, Full Polished
-
BrandProto®
-
UPC662679573485
-
Manufacturer Part NumberJ5334CF
-
CountryUSA|Canada
-
Finish/CoatingFull Polished
-
MaterialAlloy Steel
-
Measurement SystemImperial
-
Wrench Opening1-1/16 in
-
Specifications MetASME B107.21
-
Drive Size1/2 in
-
Overall Length2-7/8 in
- Crowfoot wrenches are used in hard-to-reach, restricted access situations where a standard wrench or ratchet cannot reach
- Anti-slip design open end (ASD)
- The arched surfaces are designed to spread the contact forces over a greater area and they keep the loads off the corners of the fastener which helps prevent fastener rounding
- Broad size range ensures the right tool for the application
- Full polish finish provides corrosion resistance and easy-to-clean surfaces
- Has patented locking grooves that help prevent the wrench from slipping off the fastener when turning
- Locking hole feature helps keep the crowfoot wrench engaged on the extension during use reducing downtime due to detachment of crowfoot in awkward spaces
- Use with locking extensions to reach into spaces too small for a mechanic's arm or where the fastener is out of site
- 12 point allows for fine indexing
- Helping to improve speed and access
- Fits 4, 6 and 12 point fasteners
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4217540 |
| Berkshire eSupply | KP4217540 |
| Berkshire eSupply | KP4217540 |
| Berkshire eSupply | KP4217540 |
-
UNSPSC27111756
-
Standards/ApprovalsASME B107.21
-
WarrantyLifetime
Recently Viewed
Proto® J5334CF Crowfoot Wrench, Imperial, 1-1/16 in Wrench, 1/2 in Drive, 2-7/8 in OAL, ASME B107.21, Full Polished
CPVC PIPE-NIBCPVCC80600>
HCI Preferred Supplier 38106 90 deg Tube-to-Pipe Elbow, 5/8 x 3/8 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
HCI Preferred Supplier 38106 90 deg Tube-to-Pipe Elbow, 5/8 x 3/8 in Nominal, Nylon AB x Male NPTF End Style, CA360 Brass
Square-D 30-AMP 4-POLE 208/240V CONTACTORS SQU 8910-DPA-34-V-09
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This four pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. It also has a 2 HP at 115 VAC single phase, 5 HP at 230 VAC single phase and 10 HP at 230 VAC three phase, 15 HP at 460 VAC three phase and 20 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 208/240 VAC 60 Hz, 220 VAC 50 Hz coil. The contactor has straight through wiring. Contactor is 3.78 inches by 2.75 inches and 3.04 tall. These contactors are UL component recognized and CSA certified.
Square-D 60-AMP 3-POLE 120-VOLT CONTACTORS SQU 8910-DPA-63-V-02
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This three pole definite purpose contactor has a full load rating of 60 ampere and a resistive rating of 75 amperes. It also has a 5 HP at 115 VAC single phase, 10 HP at 230 VAC single phase and 25 HP at 230 VAC three phase, 30 HP at 460 VAC three phase and 30 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 110/120 VAC 50/60 Hz coil. The contactor has straight through wiring. Contactor is 4.06 inches by 2.56 inches and 3.67 tall. These contactors are UL component recognized and CSA certified.
35-V-9253020 Dodge® 111099 Type A1 Sheave, 7/8 to 3-1/4 in Taper-Lock® Bore, 9-1/4 in OD, 3 Grooves, 9.15 in Dia Pitch, 2.37 in W Face5
Sheaves are manufactured in Dodge® plants under strict quality control assurances. Precision machining meets or exceeds joint extended belt life. Dodge® manufactures all sheaves in plants certified to ISO 9002 quality standards.
