Browning® 1211119 Minimum Plain Bore Spur Gear, 16 Diametral Pitch, 14.5 deg, 1/2 in W Face, 32 Teeth, 2 in Dia Pitch, 1/2 in Dia Bore, Steel
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
-
BrandBrowning®
-
UPC662289132386
-
Manufacturer Part Number1211119
-
CountryUSA
-
Face Width1/2 in
-
Pitch Diameter2 in
-
MaterialSteel
-
Pressure Angle14.5 deg
-
TypeMinimum Plain Bore
-
Hub Diameter1-3/4 in
-
Hub Projection1/2 in
-
Diametral Pitch16
-
Number of Teeth32
-
Outside Diameter2.12 in
-
Bore Diameter1/2 in
-
Overall Length1 in
- Browning® split taper bushed spur gears are shaft ready and eliminate costly reworking of minimum bore gears
- Helical gears are quieter than spur gears and give maximum smoothness on parallel shafts
- Designed to increase output, reduce costs and avoid specials
- Minimum bore spur gears are provided from stock to allow for simple modifications
-
Alternative Part NumberNSS1632
-
UNSPSC31171707
-
Standards/ApprovalsAGMA Standard
-
Warranty1 Year
-
Package DescriptionEACH
-
Catalog
Recently Viewed
Browning® 1211119 Minimum Plain Bore Spur Gear, 16 Diametral Pitch, 14.5 deg, 1/2 in W Face, 32 Teeth, 2 in Dia Pitch, 1/2 in Dia Bore, Steel
Browning® offers a comprehensive line of off-the-shelf gears, including spur, miter, bevel and change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14-1/2 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
Working Load Limit: 12 tons
Safety Factor: 6:1
Inside Width: 3.26"
Inside Height: 4.69"
Mouth Width: 2.03"
Shackle Size: 1-1/4"
Pin Size: 1-3/8"
Material: Carbon Steel Shackle
Alloy Pin
Finish: Galvanized
Type: Screw Pin Anchor
Product Weight: 9.5 lbs.
Standards: Meets or exceeds all requirements of ASME B30.26, Federal Specification RR-C-271, & ASTM A148M.
Crosby® 1016964 HR-125 Swivel Hoist Ring, 10000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.94 in Bail, 1-8 UNC Thread
Crosby® 1016964 HR-125 Swivel Hoist Ring, 10000 lb Load, 180 deg Pivot, 360 deg Swivel, 0.94 in Bail, 1-8 UNC Thread
Sealmaster® 1400400000 3-Piece Precision Grade General Purpose Bearing Rod End, 1/4 in Dia Bore, 3/4 in OD, 3/8 in W, 1700 lb Static Load, Carbon Steel
Sealmaster® two and three piece rod end bearing housing designs have been optimized for overall strength. This housing advantage and variety of outer race materials including brass, steel, Delrin® and PTFE liners provide a wide selection of application solutions. Sealmaster® rod end bearings can be joined together or connected with a threaded rod or tube as linkage assemblies for flexibility in motion transfer. In addition Sealmaster® rod end bearings can accommodate angular misalignment to provide ease in assembly and smooth motion transfer in a variety of applications.
