Morse® Raider® Plus XJ0205 Standard Single Reduction Worm Gear Reducer, C-Face Quill Input, Shaft Output, 5.23 hp Input, 20:1 Gear, 87.5 rpm Maximum Output, 188.35 in-lb Input/87.5 in-lb Output Torque Rating
With a large variety of add on accessories, the Raider® Plus worm gear reducer is a problem solver. Four available styles make it the most flexible worm gear product in the drives and components portfolio. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors. The Raider Plus worm gear reducer product line features a center distance range from 1 to 6 in with ratios from 5:1 to 60:1. It also contains an output torque range from 200 to 10000 ft-lb. Additionally, the line is an industry leader due to its patented design technology and manufacturing techniques.
-
BrandMorse®
-
UPC662288364795
-
Manufacturer Part NumberXJ0205
-
CountryUSA
-
Centre Distance3-3/4 in
-
MaterialCast Iron
-
Torque Rating188.35 in-lb Input/87.5 in-lb Output
-
Gear Ratio20:1
-
TypeStandard Single Reduction
-
Horsepower5.23 hp Input
-
Input Maximum Speed1750 rpm
-
Input Size7/8 in Dia
-
Input TypeC-Face Quill
-
Keyway Size3/16 x 3/32 in Input
-
Output Maximum Speed87.5 rpm
-
Output Size1-5/8 in Dia x 3-1/2 in L
-
Efficiency80 %
-
Output TypeShaft
- Rugged cast iron housing provides maximum strength and dependability
- Integral worm and shaft - hardened to 58RC for extra strength
- Tapered roller bearings on input and output shafts - absorb radial and thrust loads
- Forged or cast bronze worm gears - provide optimum balance of strength and wear resistance
-
Alternative Part Number375Q140LR20
-
UNSPSC26111537
-
Package Description1/PK
-
WarrantyLimited
-
Instruction/Installation Manual
Recently Viewed
Morse® Raider® Plus XJ0205 Standard Single Reduction Worm Gear Reducer, C-Face Quill Input, Shaft Output, 5.23 hp Input, 20:1 Gear, 87.5 rpm Maximum Output, 188.35 in-lb Input/87.5 in-lb Output Torque Rating
With a large variety of add on accessories, the Raider® Plus worm gear reducer is a problem solver. Four available styles make it the most flexible worm gear product in the drives and components portfolio. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors. The Raider Plus worm gear reducer product line features a center distance range from 1 to 6 in with ratios from 5:1 to 60:1. It also contains an output torque range from 200 to 10000 ft-lb. Additionally, the line is an industry leader due to its patented design technology and manufacturing techniques.
Gates® Power Transmission Micro-V® 500L10 Heavy Duty V-Belt, L Section, 3/16 in W Top, 50 in L Outside, 1/4 in THK, Chloroprene
Exclusive truncated (shortened) profile gives Gates® Micro-V® belts increased flexibility, reduced heat buildup and allows performance at higher speeds on smaller diameter sheaves.
Browning® 767885 VPE 200 Normal Duty Pillow Block Ball Bearing, 3/4 in Dia Bore, 3-25/64 to 4-11/64 in L Bolt Center-to-Center, 1-5/16 in Base to Bore Centerline, 5 in OAL x 2-17/32 in OAH
Browning® mounted ball bearings feature multiple housing styles, materials and configurations, an extended inner race insert bearing with ball riding nylon retainer. The insert features a rivet to prevent outer ring rotation and is available with setscrew, eccentric, or BOA concentric locking collar. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction. Depending on your preference, these bearings are available in inch and metric bore with a wide variety of cast iron, stamped steel or rubber mount housings or specific industry solutions as illustrated on the pages to follow.
Morse® Raider® Plus XH1204 Single Reduction Standard Worm Gear Reducer, C-Face Quilled Input, Double Solid Shaft Output, 1 hp, 15:1 Gear Ratio, 116.6 rpm Maximum Output, 174.31 in-lb Input/116.6 in-lb Output Torque Rating
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
Sloan® A-37A Regal® Urinal Drop-In Kit, For Use With 1.5 gpf Urinal, Plastic/Rubber, Black
Sloan® A-37A Regal® Urinal Drop-In Kit, For Use With 1.5 gpf Urinal, Plastic/Rubber, Black
HCI Preferred Supplier 38965 Type B Reinforced Air Brake Tubing, 100 ft L, 0.062 in THK Wall, Nylon
HCI Preferred Supplier 38965 Type B Reinforced Air Brake Tubing, 100 ft L, 0.062 in THK Wall, Nylon
