Browning® Classical Gripbelt® 1042621 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 10-1/4 in OD, 9.7 in (A)/10.2 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042621 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 10-1/4 in OD, 9.7 in (A)/10.2 in (B) Dia Pitch, 7/8 in W Face
-
BrandBrowning®
-
UPC662289292400
-
Manufacturer Part Number1042621
-
CountryUSA
-
Face Width7/8 in
-
Bushing TypeH
-
Pitch Diameter9.7 in (A)/10.2 in (B)
-
FinishGray Painted
-
MaterialCast Iron
-
TypeType 3
-
SeriesBK Series
-
Hub Projection17/32 in
-
Outside Diameter10-1/4 in
-
Bore Diameter3/8 to 1-1/2 in
-
Bore TypeSplit Taper
-
Overall Length1-9/16 in
-
Suitable For Use With4L/A and 5L/B Cross Section Belt
- Largest Selection of H Bushed sheaves of any other manufacturer - Browning offers bushed sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
- Combination Groove - All Browning BK H Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Tightened micro-finish on groove walls for increased belt life
- Split Taper® bushings are highest torque carrying capacity in the Browning® bushing product line
- Double split barrel assures true concentricity
- Largest Selection of H Bushed sheaves of any other manufacturer - Browning offers bushed sheaves in both A and B Combination (A/B) configuration
- 1 and 2 Grooves are available to meet any fractional horsepower requirement
- Sheaves are Statically Balanced - All sheaves are statically balanced to assure smooth, vibration free performance
- Combination Groove - All Browning BK H Sheaves permit the running of A, 4L, B and 5L Belts to be run in them, thus providing a variety of different pitch diameters and horsepowers
- Incorporates Browning Split Taper Bushing - The only bushing system that provides a true Key-to-Key drive to both the shaft and the hub
- Close Grain Cast iron - Close grain cast iron allows Browning to machine our sheaves to the closest tolerances possible
-
Alternative Part NumberBK105H
-
UNSPSC24101610
-
Package DescriptionEACH
-
Warranty1 Year
-
Catalog
Recently Viewed
Browning® Classical Gripbelt® 1042621 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 10-1/4 in OD, 9.7 in (A)/10.2 in (B) Dia Pitch, 7/8 in W Face
Browning® Classical Gripbelt® 1042621 BK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 10-1/4 in OD, 9.7 in (A)/10.2 in (B) Dia Pitch, 7/8 in W Face
From wranglin' to buildin', these gloves are tough for the job! cowhide is the most commonly used leather due to availability. Characteristics include a good balance between abrasion-resistance, dexterity, durability and comfort. The 32113 unlined drivers glove features: cv grade cow grain for excellent strength, shirred elastic back for enhanced fit and safety, cotton hem and a keystone thumb pattern.
Alemite® 1612-B 65 deg Thread Fitting, 1/8 in NPTF Thread, 27/32 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
Alemite® 1612-B 65 deg Thread Fitting, 1/8 in NPTF Thread, 27/32 in OAL, 19/64 in L Shank, Trivalent Zinc Plated
CYLINDER WRENCH T-TYPE 3/8"-FOR86143>
Threaded studs are available in 1/4-20 and 3/8-16 thread diameters with a variety of external thread and shank lengths for use in concrete, concrete over steel deck, concrete masonry walls and steel. They are used for applications where it may be desirable to remove the fixture or where shimming may be required or for suspending small diameter pipe (e.g. water lines, sprinkler systems). Knurled shank designs are available to increase performance in steel base materials. A plastic flute is mounted on the pin shank to retain the drive pin in the barrel of the tool providing guidance during the driving operation. Rod hangers and post nut hanger clips are available for suspending mechanical and electrical components from concrete and steel. They have an internally threaded clip or post nut designed to accept either 1/4-20 or 3/8-16 threaded rod. For the electrical trade, BX and EMT (electrical metallic tubing) conduit clips are provided in various sizes for attaching conduit to base materials where easy removal is not a requirement. Rebar basket clips are typically used in highway construction and paving applications to hold the support baskets for the reinforcing bars in place while the concrete is being poured.
BEARING ADAPTER METRIC LOCK WASHER - SNRMB6>
