Browning 15:1 SHAFT MOUNT GEAR REDUCERS BRW 203-SM-T-P-15
Shaft mount reducers are enclosed helical gear reducers with a hollow output. They are mounted directly on the input shaft of the driven machine and are supported by the shaft and torque arm arrangement or motor mount frame. This eliminates the need for additional components to transmit torque from the reducer to the equipment.
-
BrandBrowning®
-
UPC662288910374
-
Manufacturer Part NumberPD0003
-
CountryUSA
-
Lubrication TypeSynthetic/Mineral Oil
-
Centre Distance5.26 in
-
MaterialCast Iron
-
Torque Rating36.013 in-lb Input/540.19 in-lb Output
-
Gear Ratio15:1
-
TypeType SMTP
-
Horsepower1 hp
-
Input Maximum Speed1750 rpm
-
Input Size1.25 in Dia x 5.31 in L
-
Input TypeSolid Shaft
-
Dimensions12.88 in L x 13.85 in W x 16.16 in H
-
Output Maximum Speed116.67 rpm
-
Output Size2-3/16 in
-
Efficiency80 %
-
Output TypeTapered Bore
- Tapered stabilizer ring minimizes wobble and resists fretting corrosion
- End cap seals quill end from contamination
- Exclusive Taper Bushing, Single TorqTaper Bushing installs from either side of the unit for easy on - easy off mounting, with stabilizer ring
- Commercially available double lip seals ride on plunge ground shafts, with exclusive barrier seal arrangement
- Options and Accessories, Complete range of motor mounts, belt guards, backstops, and screw conveyor drive options
-
Alternative Part Number203SMTP15
-
UNSPSC27111767
-
Package DescriptionEACH
-
Standards/ApprovalsAGMA Standard
-
Warranty2 Years
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
Shaft mount reducers are enclosed helical gear reducers with a hollow output. They are mounted directly on the input shaft of the driven machine and are supported by the shaft and torque arm arrangement or motor mount frame. This eliminates the need for additional components to transmit torque from the reducer to the equipment.
Browning® Classical Gripbelt® 1042233 AK Series Type 3 Single Groove Sheave, Split Taper Bore, 3/8 to 1-1/2 in Dia Bore, 6.95 in OD, 6.9 in (A)/6.36 in (3L) Dia Pitch, 3/4 in W Face
Gates® Power Transmission Super HC® Molded Notch PowerBand® 2/3VX500 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 50 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Jet® L-100 series hand chain hoist integrates safety, durability and innovation enabling it to operate in the most demanding industrial environments. Safety features such as optional overload protection prevents the hoist from lifting damaging loads beyond its rated capacity. The Jet® exclusive innovation showcased in the patented fused brake system reduces maintenance costs and limits down time Jet® is so confident in the durability of the fused brake design we back it with an industry leading lifetime replacement warranty. The Jet® L-100 is available in 1/4 ton to 20 ton capacities and standard lifts of 10, 15, 20 and 30 feet (custom lifts available). Regardless of how harsh the environment, the Jet® L-100 series hand chain hoist is engineered to perform.
Browning® Classical Gripbelt® 3693603 B5V® Solid Type 1 Single Groove Sheave, Split Taper Bore, 1/2 to 2-7/16 in Dia Bore, 4.88 in OD, 4.4 in (A)/4.9 in (B)/4.7 in (BV) Dia Pitch, 1 in W Face
