Dichtomatik 75065586 Extruded O-Ring Cord, 3/8 in Dia, 50 Durometer, Nitrile, Domestic
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
-
BrandDichtomatik
-
Manufacturer Part Number75065586
-
CountryUSA
-
MaterialNitrile
-
Diameter3/8 in
-
Domestic/ImportDomestic
-
Durometer50
- Good chemical resistance to mineral oils and greases
- HFC up to about 50 deg C and water up to a maximum of 80 deg C
-
UNSPSC31401503
-
Alternative Part NumberCRD 375 NC50
-
Catalog
Recently Viewed
Dichtomatik 75065586 Extruded O-Ring Cord, 3/8 in Dia, 50 Durometer, Nitrile, Domestic
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
BBI 042314 Partially Threaded Cap Screw, 1/2-13, 3-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 042314 Partially Threaded Cap Screw, 1/2-13, 3-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
Morse® 604001 Unbonded Friction Facing
G.L.HUYETT™ LP-312-2062 Imperial Lynch Pin, 5/16 in Dia, 2-1/16 in L Usable, Carbon Steel, Zinc Yellow
G.L.HUYETT™ LP-312-2062 Imperial Lynch Pin, 5/16 in Dia, 2-1/16 in L Usable, Carbon Steel, Zinc Yellow
BBI 401014 Partially Threaded Cap Screw, 1/4-20, 1-1/2 in L Under Head, 316 Grade, Stainless Steel
BBI 401014 Partially Threaded Cap Screw, 1/4-20, 1-1/2 in L Under Head, 316 Grade, Stainless Steel
Sealmaster® 705321 Non-Expansion Standard Duty Straight Bore Ball Bearing Insert, 1-15/16 in Dia Bore, 3.5433 in OD, 2-3/32 in W, 7889 lb Dynamic/5216 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
