McGill 2-1/2" TRAKROL TRACK ROLLERS MCG PCF-2-1/2
TRAKROL® bearings feature black oxide treated bearing steel. They utilize either a precision ball or tapered roller bearing insert for longer operating life under combination radial and thrust loads. The capacity for combination loads allows the TRAKROL® bearing to be available in plain (cylindrical), V-groove and flanged outside diameter in both stud and yoke styles. Small sizes less than 3 in outside diameter or point diameter use sealed ball bearing inserts. They also use a NYLAPLATE® seal for additional protection. Stud type configurations utilize a metal end plug seal on the roller face providing a long lasting seal. Both bearing types provide a large internal grease reservoir along with special sealing. This makes TRAKROL® bearings an excellent choice where reduced maintenance is required.
-
BrandMcGill®
-
UPC726166038694
-
Manufacturer Part Number2244700000
-
CountryUSA
-
Load Capacity5120 lb Dynamic/3120 lb Static
-
Temperature Rating-20 to 250 deg F
-
FinishBlack Oxide
-
Thread Length1-1/2 in
-
Thread Size1-14 UNC
-
Maximum Speed1100 rpm
-
Closure TypeSealed
-
TypeCylindrical OD
-
Roller Diameter2-1/2 in
-
Roller MaterialChrome Steel
-
Roller Width1-11/16 in
-
Head TypeHex
-
SeriesPCF
-
Stud Diameter1 in
-
Stud Length2-1/4 in
-
Stud Material8620H Steel
-
Stud TypeStandard
- Precision ball or tapered roller bearing inserts allow for combination radial and thrust loads
- A heavy sectioned outer race design to help withstand shock loading of cam follower operation
- A ductile stem on stud type versions that provides toughness
- Ball and tapered roller bearings have rubber lip contact seal
- The inch design threads are manufactured to a class 2 tolerance
- Bearings are supplied pre-lubricated and maintenance free
-
Alternative Part NumberPCF 2 1/2
-
UNSPSC26101708
-
Standards/ApprovalsABMA Standard
-
Specification Sheet
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
TRAKROL® bearings feature black oxide treated bearing steel. They utilize either a precision ball or tapered roller bearing insert for longer operating life under combination radial and thrust loads. The capacity for combination loads allows the TRAKROL® bearing to be available in plain (cylindrical), V-groove and flanged outside diameter in both stud and yoke styles. Small sizes less than 3 in outside diameter or point diameter use sealed ball bearing inserts. They also use a NYLAPLATE® seal for additional protection. Stud type configurations utilize a metal end plug seal on the roller face providing a long lasting seal. Both bearing types provide a large internal grease reservoir along with special sealing. This makes TRAKROL® bearings an excellent choice where reduced maintenance is required.
3 45-D BUTT WELD ELBOW
SIZE-#3 ARTIST BRUSH--CARDED-JWH790869 >
United Abrasives-SAIT 70029 2A Premium Coated Flap Wheel, 1-1/2 in Dia, 1/2 in W Face, 1/4 in Dia Shank, 240 Grit, Very Fine Grade, Aluminum Oxide Abrasive
3-7/16" -ID FLANGE CARTRIDGE UNIT-FYHUCFCX1755E >
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
